InFocus manual PICTUREBasic Menu, IN3118HD User’s Manual, Description

Page 23
PICTURE>>Basic Menu

IN3118HD User’s Manual

PICTURE>>Basic Menu

Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the PICTURE>>Basic menu. Press the cursor ▲▼ button to move up and down in the PICTURE>>Basic menu. Press ◄► to change values for settings.

Note:

Customizing the settings in PICTURE>>Basic menu is only available in User 1/ 2/ 3 mode.

ITEM

DESCRIPTION

 

 

Display Mode

Press the cursor ◄► buttons to set the Display Mode.

(Range: Movie/ Bright/ Normal/ User 1/ User 2/ User 3)

 

Brightness

Press the cursor ◄► buttons to adjust the display brightness.

 

 

Contrast

Press the cursor ◄► buttons to adjust the display contrast.

 

 

Color

Press the cursor ◄► buttons to adjust the video saturation.

Notes: This function is only available when Video or S-Video input source is se-

 

lected.

Tint

Press the cursor ◄► buttons to adjust the video tint/hue.

Notes: This function is only available when Video or S-Video with NTSC

 

system input source is selected.

Sharpness

Press the cursor ◄► buttons to adjust the display sharpness.

Notes: This function is only available when Video or S-Video input source is se-

 

lected.

Flesh Tone

Press the cursor ◄► buttons to adjust the display flesh tone.

Notes: This function is only available when Video or S-Video input source is se-

 

lected.

Reset Picture Set-

Press the ENTER/SELECT button to reset all settings to default values.

tings

 

– 16 –

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Page Trademark Recognition CopyrightDisclaimer IN3118HD User’s Manual Important Safety InformationSymbols Used General Safety InformationPreface Projector Installation NoticePower Safety Replacing the Lamp Cleaning the ProjectorSymbol Explanations About this ManualTROUBLESHOOTING SETUP AND OPERATIONON-SCREEN DISPLAY OSD MENU SETTINGS MAINTENANCE AND SECURITYTIMING MODE TABLE PROJECTOR DIMENSIONSSAFETY CERTIFICATIONS PROJECTION DISTANCE VS. PROJECTION SIZEDLP Projector - User’s Manual Packing ChecklistGETTING STARTED DESCRIPTION Front-right ViewViews of Projector Parts LABELError code see LED Error Messages on page Top view-On-screen Display OSD buttons and LEDssee LED Error Messages on page SEE PAGE Rear viewLABEL DESCRIPTIONBottom view Remote Control Parts Adjust overscan Inserting the Remote Control Batteries SETUP AND OPERATIONStarting and Shutting down the Projector Adjusting the Projector Level Adjusting the Zoom ring, Focus and Keystone The volume control appears on the display Adjusting the Volume1. Press the Volume but- tons on the projector or the remote control 2. Use the Vol +/- buttons on the projector or the remote controlOSD Menu Controls ON-SCREEN DISPLAY OSD MENU SETTINGSNavigating the OSD 3. Press the cursor button until the language you want is selected Setting the OSD LanguageSet the OSD language to your preference before continuing 2. Press the cursor button until Language is highlightedPICTURE Basic OSD Menu OverviewSETUP Basic SETUP AdvancedPICTUREBasic Menu PICTUREAdvanced Menu Press the ENTER/SELECT button to enter the HSG Adjustment sub menu HSG AdjustmentSee PC Detail Adjustment on page DISPLAY MenuPress to change values for settings PC Detail Adjustment SETUPBasic Menu Press the ENTER/SELECT button to enter the Source sub menu Menu SettingsSource Press the ENTER/SELECT button to enter the Menu Settings sub menuLan Control Settings Network State DLP Projector - User’s Manual Preparing Email Alerts Select the alert conditions by checking the desired boxes SETUPAdvanced Menu Press the ENTER/SELECT button to enter the Lamp sub menu AudioLamp Press the ENTER/SELECT button to enter the Audio sub menuPress the ENTER/SELECT button to enter the Closed Caption sub menu HDMIClosed Caption Press the ENTER/SELECT button to enter the HDMI sub menuPresentation Timer STATUS Menu Replacing the Projection Lamp MAINTENANCE AND SECURITYLift the module handle up Remove the single screw on the lamp compartment coverRemove the lamp com- partment cover Remove the three screws from the lamp module6. Pull firmly on the module handle to remove the lamp module Cleaning the Projector Cleaning the LensCleaning the Case Tips for Troubleshooting TROUBLESHOOTINGCommon Problems and Solutions Problem The image is blurred LED Error MessagesImage Problems Problem No image appears on the screenProblem The image is flat with no contrast Lamp ProblemsRemote Control Problems Problem The image is streakedProblem The sound is distorted Audio ProblemsHaving the Projector Serviced Problem There is no soundQ. How can I tell if a cable is an HDMI certified cable? HDMI Q & AQ. How do I run HDMI cables longer than 10 meters? Safety certification Operation temperature Dimensions W x D x H SPECIFICATIONSSpecifications Model Display type Native Resolution Projection distancePROJECTION DISTANCE Projection Distance and Size TableProjection Distance vs. Projection Size 169 SCREENHDMI Timing Mode TableH-S YNC V-S YNCHDMI Projector Dimensions Canada Safety CertificationsREGULATORY COMPLIANCE FCC Warning
Top Page Image Contents