Gateway WBR-100 manual Making connections

Making connections

Warning

Use only the AC adapter and power cord provided with the router. Use of any other adapter or power cord your router and void your warranty

4 Plug the AC adapter into the power cord, then plug the power cord into an electrical outlet. Connect the other end of the adapter to the power connector on the back of the router. (see the illustration on “Back” on page 8)

■The green Power LED turns on

■The green Wireless LED turns on

5 Turn on the DSL or cable modem. Check the LEDs on the modem to make sure that the modem is connected and operating normally. The WAN LED on the router lights when the modem is connected correctly to the router.

6 Turn on the host computer. The LAN LED corresponding to the RJ-45 jack used for the LAN connection on the router lights when the computer is connected correctly to the router.

www.gateway.com 11