Gateway WBR-100 manual Terms you should know

Page 78

Terms you should know

PPPoE (Point to Point Protocol over Ethernet) - A communications protocol that combines the Ethernet and Point-to-Point Protocol (PPP) standards. PPPoE is sometimes used with broadband modems.

PPTP (Point-to-Point Tunneling Protocol) - A protocol that lets a private network connect securely to another private network through private "tunnels" over the public Internet. This kind of interconnection is known as a virtual private network (VPN).

protocol - A set of communication rules. When two computers or networks use the same protocol, they can communicate with each other.

RIP (Routing Information Protocol) - A protocol used by a router to maintain routing tables of configuration information to filter incoming and outgoing traffic based on the IP addresses of the senders and receivers.

RJ-45- RJ-45 jacks connect a computer to a router. In a wired network, one end of a network cable is plugged into the RJ45 jack on a computer. The other end of the cable is plugged into an RJ45 jack on a router. Data is passed to and from the computer and router through the RJ45 jacks.

router - A hardware device that connects devices in a network. A router can also provide Internet access to the networked devices.

RTS (Request To Send) - A signal sent by a receiving device, like a router, that tells the sending device to begin transmission.

server - A computer that provides shared network service to a network. For example, a server can provide file and printer sharing between networked computers.

SSID (Service Set IDentifier) - In a wireless network, the SSID identifies a network. All computer in the network must use the same SSID.

static IP address - An IP address that is permanently assigned to a device.

static routing - The routing of network information through a single, set path.

subnet mask - This number identifies what subnetwork the computer is located on. This number is the same on all computers on a home network.

switch - Like a hub, a switch is a hardware device that links computers to create a network. A switch provides better data routing than a hub.

TCP (Transmission Control Protocol) - A protocol used in connection with Internet Protocol (IP) to let computers communicate over the Internet.

www.gateway.com

75

Image 78
Contents Installationguide Contents Safety, Regulatory, and Legal Information TroubleshootingSpecifications GlossaryIntroduction Features Important safeguards PrecautionsPackage contents Parts and accessories Front DescriptionLEDDescription Connector/control Description BackInitial setup Preparation Connecting the hardwareMaking connections To connect the hardwareMaking connections Configuring the computers To configure computers using Windows XPTo configure computers using Windows To configure computers using Windows 98SE or Me Configuring the computersContacting and configuring the router Contacting the routerTo contact the router Contacting and configuring the router Configuring the router To configure the routerContacting and configuring the router Initial setup If you selected Other e.g., Fixed Wireless Initial setup Routine Router SettingsStatusand Using router settings and features Configuring LAN settingsTo configure the LAN settings Using router settings and features Configuring wireless settings To configure the wireless settingsUsing router settings and features Routine Router Settings and Status Changing the password To change the passwordChecking router status To review the router statusPage Setting up wireless operation Configuring WEP security in Windows XP To manually enter the WEP encryption key in Windows XPReturning the router settings to the default settings Advanced Advanced features Configuring advanced Internet settings To configure the advanced Internet settingsAdvanced Features and Configuration Advanced features Configuring access control settings To configure the Access Control settingsAdvanced features Advanced Features and Configuration Turning on remote management To turn on remote managementSetting up a virtual server To set up a virtual serverUsing a dynamic DNS service To use a Dynamic DNS service To upgrade the firmware Upgrading the firmwareUsing the PC Database To use the PC Database Advanced Features and Configuration Changing router options To change router OptionsAdvanced Features and Configuration Changing security settings To change router security settingsEstablishing a router security scheme Change log settings To make log settings Set the MAC address To set the MAC addressConfigure routing To set the routing configurationAdvanced Features and Configuration Troubleshooting Ping utility To use the ping utility to obtain an IP addressTo resolve an IP address Ping utilitySetting a static IP address To set a static IP address using Windows XPTo set a static IP address using Windows To set a static IP address using Windows 98SE and Windows MeClick the DNS Configuration tab, then click Enable DNS Problem resolution Your wireless router will not turn on no LEDsYou cannot access your wireless router Problem resolution Troubleshooting Click the Link Information tab Troubleshooting Resource Service description How to reach Automated troubleshooting systemService description How to reach Technical SupportTroubleshooting Glossary a Terms you should know Terms you should know Appendix a Glossary Terms you should know Appendix a Glossary Specifications B Specifications Wireless Guidance Regulatory compliance statementsAppendix C Safety, Regulatory, and Legal Information Page United States of America Unintentional emitter per FCC PartPage California Proposition 65 Warning FCC declaration of conformityAll Rights Reserved Trademark AcknowledgmentsAppendix C Safety, Regulatory, and Legal Information MAN 802.11B Router GDE R0 8/03