Using router settings and features
7 In the Access Point section, under Allow Internet access by, click ALL Wireless stations or Selected Wireless stations only. If you clicked Selected Wireless stations only, click Select Stations.
The computers listed are current DHCP clients or have been added manually to the PC Database on the Advanced menu. If a DHCP client is not listed, restart the computer.
Select the computers you want to have access to your wireless network. To select multiple computers, hold down the CTRL key (Mac - SHIFT key) when you click computer names, or click Select All or Select None.
8 Click Apply to accept your changes or Cancel to remove your entries and return to default values, then click Close to return to the Wireless screen.
9 Click Save to accept your Wireless changes or Cancel to remove your entries and return to default values.
Changing the password
This screen allows you to change the router password from the default (admin) setting or from the current setting. You will be prompted for the password each time you attempt to open the Gateway Wireless Router Setup utility.
To change the password:
1
2 In the New Password field, type the new password (up to 9 alphanumeric characters).
3 In the Verify Password field, type the same password to confirm your change.
4 Click Save to accept your Password change or Cancel to remove your entry and return to the default setting.
www.gateway.com | 27 |