Onkyo SR607 instruction manual Bi-amping the Front Speakers, Bi-amping Speaker Hookup

Page 19

Connecting the AV Receiver—Continued

Bi-amping the Front Speakers

The FRONT L/R and SURR BACK L/R terminal posts can be used with front speakers and surround back speakers respectively, or bi-amped to provide separate tweeter and woofer feeds for a pair of front speakers that support bi-amping, providing improved bass and treble performance.

•When bi-amping is used, the AV receiver is able to drive up to 5.1 speakers in the main room.

•For bi-amping, the FRONT L/R terminal posts con- nect to the front speakers’ woofer terminals. And the SURR BACK L/R terminal posts connect to the front speakers’ tweeter terminals.

•Once you’ve completed the bi-amping connections shown below and turned on the AV receiver, you must set the “Speaker Type” setting to “Bi-Amp” to enable biamping (see page 43).

Important:

•When making the bi-amping connections, be sure to remove the jumper bars that link the speakers’ tweeter (high) and woofer (low) terminals.

•Bi-amping can only be used with speakers that support bi-amping. Refer to your speaker manual.

Bi-amping Speaker Hookup

1	Connect the AV receiver’s FRONT R positive (+)
	terminal to the right speaker’s positive (+) Woofer
	(low) terminal. And connect the AV receiver’s
	FRONT R negative (–) terminal to the right
	speaker’s negative (–) Woofer (low) terminal.

2	Connect the AV receiver’s SURR BACK R posi-
	tive (+) terminal to the right speaker’s positive (+)
	Tweeter (high) terminal. And connect the AV
	receiver’s SURR BACK R negative (–) terminal
	to the right speaker’s negative (–) Tweeter (high)
	terminal.

3	Connect the AV receiver’s FRONT L positive (+)
	terminal to the left speaker’s positive (+) Woofer
	(low) terminal. And connect the AV receiver’s
	FRONT L negative (–) terminal to the left
	speaker’s negative (–) Woofer (low) terminal.

4	Connect the AV receiver’s SURR BACK L posi-

tive (+) terminal to the left speaker’s positive (+) Tweeter (high) terminal. And connect the AV receiver’s SURR BACK L negative (–) terminal to the left speaker’s negative (–) Tweeter (high) ter- minal.

L

Left speaker

R

FRONT SPEAKERS

L

Tweeter (high)

Woofer (low)

R

Tweeter (high)

Right speaker

Woofer (low)

19

Image 19

Contents TX-SR607 Avis Important Safety InstructionsBatteries and Heat Exposure Warning PrecautionsPower Preventing Hearing Loss CautionHow to mount the AC plug Supplied AccessoriesPrecautions Speaker cable labels Power-plug adapterConnections FeaturesAmplifier ProcessingSubwoofer Center speaker Surround left and right speakers Multiroom CapabilityMain Room Zone 2 RoomContents Other models Front & Rear PanelsFront Panel North American/Taiwan modelsFront & Rear Panels Display Digital in Optical 1 Rear PanelDigital in Coaxial 1 On some modelHdmi in 1-5 and OUT Remote ControlComponent Video in 1 Component Video OUTInstalling the Batteries Remote ControllerAiming the Remote Controller Controlling the AV Receiver Remote ControllerFront high left and right speakers About Home TheaterEnjoying Home Theater Front left and right speakersConnecting Your Speakers Connecting the AV ReceiverStrip 1/2-5/8 Connecting the AV ReceiverSpeaker Connection Precautions Connecting the Speaker CablesOther models North American/Taiwan modelsBi-amping Speaker Hookup Bi-amping the Front SpeakersJack Connecting AntennaConnecting the AM Loop Antenna Connecting the Indoor FM AntennaConnecting an Outdoor AM Antenna Connecting an Outdoor FM AntennaUsing a TV/FM Antenna Splitter AV Cables & Jacks About AV ConnectionsAV Connection Color Coding Optical Digital JacksAbout Copyright Protection Connecting Components with HdmiAbout Hdmi Supported Audio FormatsStep Video SignalsAudio Signals Making Hdmi ConnectionsWhich Connections Should I Use? Connecting Both Audio & VideoVideo Connection Formats Audio Connection Formats Signal SelectionDVD player, etc Signal Selection Example DVD player, etc Audio Signal Flow ChartTV, projector Etc Connecting a TV or ProjectorVideo Connection Audio ConnectionDVD player Connecting a DVD PlayerDVD recorder Connecting a VCR or DVD Recorder for PlaybackVCR, DVD recorder Connecting a VCR or DVD Recorder for RecordingSatellite, cable, set-top box, etc Digital in Optical 2 CDGame Console Connecting a Game ConsoleConnecting a Portable Audio player Connecting a Camcorder or Other DeviceMake the audio connection a Phono preamp Connecting a CD Player or TurntableCD Player or Turntable MM with Built-in Phono Preamp Step CD playerConnecting a Cassette, CDR, MiniDisc, or DAT Recorder If Your iPod Doesn’t Support Video Connecting an RI DockConnecting a Dock with the Universal Port connector If Your iPod Supports VideoDirect Change Connecting Onkyo u ComponentsConnecting the Power Cord Auto Power On/StandbyTurning On and Standby Turning On the AV ReceiverSmooth Operation in a Few Easy Steps Onscreen Setup Menus and Display First Time SetupUsing the Display to change the settings Using the Onscreen Setup MenusVideo Input Setup First Time SetupHdmi Input Setup Then use the Left and Right e/r buttons to select Component Video SetupTons to select 2. Component Video Input, and then pressTons to select 3. Digital Audio Digital Input SetupInput, and then press Enter Powered Zone Speaker SettingsFM/AM Frequency Step Setup on some models TV Format Setup Not North American modelsChanging the Input Display Second measurement point Audyssey 2EQ Room Correction and Speaker SetupMeasurement Positions First measurement pointWhen you’ve finished, press the Enter button Using Audyssey 2EQTurn on the AV receiver and the connected TV Following screen appears Press EnterMicrophone Error MessagesSpeaker Detect Error Disconnect the speaker setupUsing a Powered Subwoofer Changing the Speaker Settings ManuallyWriting Error VOL q/w Select a listening mode and enjoyBasic Operations Selecting the Input SourceDisplaying Source Information Adjusting the Bass & TrebleSetting the Display Brightness Basic OperationsUsing Headphones Using the Sleep TimerMuting the AV receiver Listening to the Radio Using the TunerTuning into Radio Stations Listening to the RadioDeleting Presets Selecting PresetsListening to the Radio RDS Program Types PTY Using RDS European models onlyFinding Stations by Type PTY Displaying Radio Text RTListening to Traffic News TP Function Overview UP-A1 series Dock for iPodAbout the UP-A1 series Dock Compatible iPod models Putting Your iPod in the DockControlling iPod Using Your iPod models Alarm ClockCharging Your iPod models Battery UP-A1 series Dock for iPodStatus messages AV Recording Recording Separate AV Sources RecordingSelecting on the AV receiver Using the Listening ModesSelecting with the Remote Controller Selecting Listening ModesMono/Multiplex Sources Using the Listening ModesListening Mode Button Listening Modes Available for Each Source FormatStereo Source PLIIx Music High Resolution Audio/DTS-HD Master Audio DTS Express Neo6Channel Sources PLIIx MovieDiscrete DTS-ES Matrix DTS-ES Discrete/Matrix SourcesPure Audio *1 Resolutuin Audio/DTS-HD Master Audio PLIIz HeightAbout the Listening Modes Onkyo Original DSP Modes Pages Advanced SetupOnscreen Setup Menus Main menu SubmenusCommon Procedures in Setup Menu Advanced SetupSpeaker Setup Unit Feet LPF of LFEDouble Bass*9 Speaker DistanceLeft and Right e/ r buttons to select a speaker Equalizer SettingsSpeaker Levels Calibration Press the Down w button to select Channel, and then useDolby EX Audio AdjustMultiplex/Mono Settings Dolby Settings PLIIx Music 2ch InputAudyssey Settings DTS Setting Neo6 MusicTheater-Dimensional Setting Using the Audio Settings Speaker Layout Audyssey Dynamic VolumeCinemaFILTER Music OptimizerSelect the input source that you want to Press the Receiver button followed by the Setup buttonWhen you’ve finished, press the Setup button Assigning Listening Modes to Input SourcesIntelliVolume Source SetupSync To correct a character Name EditVolume Setup Miscellaneous Volume/OSD SetupOSD Setup Remote Control Hardware SetupTuner Hdmi Control Rihd Power ControlLip Sync ColorUsing the Video Settings Lock SetupDigital Input Signal Formats Hookup Connecting ZoneConnecting Your Zone 2 Speakers Directly to the AV receiver ZoneConnecting Your Zone 2 Speakers to an Amp in Zone Setting the Powered ZoneIntegrated amp Controlling Zone 2 from the AV receiver Using ZoneAdjusting the Volume for Zone Controlling Zone 2 with the Remote ControllerMuting Zones Controlling Other Components Preprogrammed Remote Control CodesLooking up for Remote Control Code Troller Setup, and then pressControlling Other Components Entering Remote Control Codes Resetting Remote Mode Buttons Remote Control Codes for Onkyo Components Connected via uResetting the Remote Controller Controlling a TV Controlling a DVD Player, or DVD Recorder Number button Controlling a VCR or PVRPlayback button Press the appropriate Controlling a Satellite Receiver or Cable ReceiverDisc +/- button Controlling a CD Player, CD Recorder, or MD PlayerControlling an RI Dock When Using an RI DockReverse Play t button Controlling a Cassette RecorderPrevious and Next 7/6 buttons Rewind and Fast Forward 5/4 buttonsTroubleshooting Troubleshooting Onscreen menus don’t appear Remote Controller Remote controller doesn’t workAV receiver’s remote controller doesn’t control your iPod There’s no picture from a source connected to an HdmiDisplay doesn’t work Others Sound changes when I connect my headphonesRecording Can’t record Zone There’s no soundTuner Section SpecificationsAmplifier Section Video SectionNtsc Video Resolution ChartMemo 107 Onkyo Europe UK Office Onkyo Europe Electronics GmbH