Onkyo SR607 Controlling Zone 2 with the Remote Controller, Adjusting the Volume for Zone

Zone 2—Continued

Controlling Zone 2 with the Remote Controller

ON/ ZONE2

STANDBY

INPUT

SELECTOR

Note:

Adjusting the Volume for Zone 2

Remote	On the remote controller, press
controller	the [ZONE 2] button, and then
	use the VOL [q]/[w] button.

To control Zone 2, you must press the remote control- ler’s [ZONE 2] button first.

1	Press the [ZONE 2] button, then
	point the remote controller at the
	AV receiver and press the [ON/
	STANDBY] button.
	Zone 2 turns on, the ZONE 2 indicator
	lights up.

AV receiver

On the AV receiver, press the [ZONE 2] button (the ZONE 2 indicator and Zone 2 selector on the display flashes) and then use the [–]/[+] buttons within 8 seconds.

If your Zone 2 speakers are connected to a receiver or integrated amp in Zone 2, use its volume control to adjust the volume.

2	To select an input source for
	Zone 2, press the [ZONE 2]
	button, followed by an INPUT
	SELECTOR button.
	To select AM or FM press the [TUNER]
	INPUT SELECTOR button repeatedly.
	On the North American model, you can
	also select SIRIUS.
	Note:
	You cannot select different AM or FM
	radio stations for your main room and
	Zone 2. The same AM/FM radio station
	will be heard in each room.
3	To turn off Zone 2, press the
	[ZONE 2] button, followed by the
	[ON/STANDBY] button.

Muting Zones

Remote	On the remote controller, press
controller	the [ZONE 2] button, and then
	press the [MUTING] button.

To unmute a zone, on the remote controller, press the [ZONE 2] button, and then press the [MUTING] button again.

Notes:

•Only analog input sources are output by the ZONE 2 LINE OUT and ZONE 2 L/R speaker terminals. Dig- ital input sources are not output. If no sound is heard when an input source is selected, check if it’s con- nected to an analog input.

•While Powered Zone 2 is being used, listening modes that need surround back speakers (i.e., Dolby Digital EX and DTS-ES) are unavailable.

•While Zone 2 is on, ufunctions will not work.

•You cannot select different AM or FM radio stations for your main room and Zone 2. The same AM/FM radio station will be heard in each room. For example, if you have an FM station for the main room, that sta- tion will also be used in Zone 2.

•Zones can also be unmuted by adjusting the volume.

88