Onkyo SR607 Digital Input Setup, Tons to select 3. Digital Audio, Input, and then press Enter

First Time Setup—Continued

Digital Input Setup 4

If you connect a component to a digital input jack, you must assign that jack to an input selector. For example, if you connect your CD player to the OPTICAL IN1 jack, you should assign that jack to the CD input selector. By default, the COAXIAL IN1 jack is assigned to the DVD/ BD input selector, although this can be changed.

Here are the default assignments.

Input selector	Default assignment
DVD/BD	COAX1
VCR/DVR	- - - - -
CBL/SAT	COAX2
GAME	OPT1
AUX	- - - - -
TV/TAPE	- - - - -
TUNER	- - - - - (Fixed)
CD	OPT2
PORT	- - - - -

1	Press the [RECEIVER] button fol-
	lowed by the [SETUP] button.
	The main menu appears onscreen.
	If the main menu doesn’t appear, make
	sure the appropriate external input is
	selected on your TV.

2	Use the Up and Down [q]/[w] but-
	tons to select “1. Input Assign”,
	and then press [ENTER].
	The “Input Assign” menu appears.
		1. Input Assign
	1.	HDMI Input	5
	2.	Component Video Input
	3.	Digital Audio Input

Use the Up and Down [q]/[w] but- tons to select an input selector, and use the Left and Right [e]/[r] buttons to select “COAX1”, “COAX2”, “OPT1”, “OPT2”, or “- - - - - (analog)”.

•When an HDMI IN is assigned to an input selector in “HDMI Input Setup” on page 40, this input assign- ment is automatically set to the same HDMI IN. And in addition to the usual inputs (e.g., COAX1, COAX2, etc.), you can also select HDMI inputs.

•Press the [ENTER] button when you do not use the signal of audio from

the HDMI IN. The “* ” mark is dis- played like “COAX1* ”.

Examples:

If you connect your DVD player to the OPTICAL IN 1 jack, set “DVD/BD” to “OPT1”.

If you want to listen to audio from the component connected to the OPTICAL IN 2 jack when the VCR/DVR input selector is selected, set “VCR/DVR” to “OPT2”.

If you want to listen to audio from the component connected to the COAXIAL IN 1 jack when the CBL/ SAT input selector is selected, set “CBL/SAT” to “COAX1”.

For input selectors that you don’t want to assign a digital input jack, set to “- - - - - (analog)”.

Press the [SETUP] button.

The setup menu closes.

3	Use the Up and Down [q]/[w] but-
	tons to select “3. Digital Audio
	Input”, and then press [ENTER].
	The “Digital Audio Input” menu
	appears.
	1–3.	Digital Audio Input
	DVD/BD	COAX 1
	VCR/DVR	- - - - -
	CBL/SAT	COAX 2
	GAME	OPT 1
	AUX	- - - - -
	TV/TAPE	- - - - -
	TUNER	- - - - -
	CD	OPT 2
	PORT	- - - - -

Notes:

•If you connect an input component (such as UP-A1 series Dock that seated iPod) to the UNIVERSAL PORT jack, you cannot assign any input to PORT selector.

•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

42