JVC DT-V9L3DY specifications Setting of Area MARKER, Safety MARKER, R-AREA Marker

Page 11

Operation guide

Shows the buttons for each operation.

•The menu automatically disappears in about 30 seconds after the previous operation.

•Some items may not appear on the menu depending on the input or the input signal.

•The items controlled by the MAKE system do not appear on the menu.

NOTE

Setting of “AREA MARKER”, “SAFETY MARKER”, “R-AREA MARKER”,

“R-SAFETY MARKER”

The setting values and features are as follows.

OFF: Deactivate the marker.

LINE: Displays the area with an outline.

HALF: The area outside the specified aspect ratio of the screen is displayed at 50% transparency.

HALF+L: The area of the specified aspect ratio of the screen is indicated by an outline, and the area outside of that is displayed at 50% transparency.

BLK.: The area outside the specified aspect ratio of the screen is black. Only the portion of the picture within the designated area is displayed.

BLK. +L: The area of the specified aspect ratio of the screen is indicated by an outline, and the area

outside of that becomes black so that only the area inside the line is displayed.

MARKER*1

Settings for marker functions 1/2

Item

To do

Setting value

AREA MARKER*2

Activate/deactivate the area marker and select the

☞ “NOTE”

 

style of it.

 

MARKER ASPECT*2

Select the aspect ratio of the area marker.

4:3, 14:9, 13:9, 2.35:1, 1.85:1,

 

 

1.66:1

SAFETY MARKER

Activate/deactivate the safety marker and select the

☞ “NOTE”

 

style of it.

 

SAFETY AREA

Adjust the area of the safety marker.

80% – 100%

FRAME*3

Displays/hides the frame indicating the area of the

OFF, ON

 

specified aspect ratio.

 

CENTER MARKER

Displays/hides the marker indicating the center

OFF, ON

 

position of the picture.

 

LINE BRIGHTNESS

Adjust the brightness of the marker.

HIGH, LOW

2/2

 

 

Item

To do

Setting value

R-AREA MARKER*2

Activate/deactivate the area marker and select the

☞ “NOTE”

 

style of it.

 

R-MARKER ASPECT*2

Select the aspect ratio of the area marker.

4:3, 14:9, 13:9, 2.35:1, 1.85:1,

 

 

1.66:1

R-SAFETY MARKER

Activate/deactivate the safety marker and select the

☞ “NOTE”

 

style of it.

 

R-SAFETY AREA

Adjust the area of the safety marker.

80% – 100%

•The area marker and the safety marker is displayed by using MARKER button or external control.

•Select either non-“R-” items or “R-” items to activate by using external control (☞ “External Control” on page 16).

•When a picture is displayed in 4:3 aspect ratio, the safety marker for the 4:3 area is displayed.

•To display the safety marker for the area of a picture displayed in 16:9 aspect ratio, hide the area marker.

(☞ “NOTE”)

*1 Memorized for each input — composite signal input (VIDEO), component signal input (COMPO.), SDI 1 and SDI 2. *2 Displayed only when picture is displayed in 16:9 aspect ratio.

*3 For signals of NTSC, B/W60, 480/60i and 480/59.94i, only the vertical borders of the frame are displayed.

TIME CODE Setting value: OFF, ON

Activates/deactivates the display of the time data (time code) contained in the SDI signal. (☞ “On the Information Display” on page 7)

ENGLISH11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents DT-V9L3D These openings must not be blocked or covered Safety PrecautionsHow to replace the fuse Rating label is on the bottom of the monitorBusiness users Other Countries outside the European Union Dear CustomerCable European UnionAlign as illustrated InstallationTo adjust the stand height Higher positionFixing the monitor Fix the monitor to a wall by using stringsWall or a pillar using durable string Lower position To prevent an accidental fallFront panel Press buttons to select the channel to set Press or button when a menu is not displayedDisplay the menu Press buttons to select an item, then press buttonRear panel Video signals Available signalsFollowing signals are available for this monitor Operation guide Setting value OFF, onSetting value 43 Time Code Setting value OFF, on Setting of Area MARKER, Safety MARKER, R-AREA MarkerSettings for marker functions 1/2 Level meter with no signal Settings for the level meterWhen CH Arrange is set When BAR Type is setExample of the wave form monitor Ex. When Marking is set to on and Level is set toSettings for the wave form monitor Settings for the synchronization with signalsOperation guide Shows the buttons for each operation Settings of sub menu PosiColor of the format indicator Lights in orange composite signalControl Lock Setting value OFF, on Setting of Character SETSettings for the information display of the monitor About the external control Using the MAKE/TRIGGER systemExternal Control Basic command list Using the RS-232C systemCommunication specifications Command outlineTroubleshooting From the DC in terminal Self-check programCheck which lamps are flashing Cabinet MaintenanceUnplug this product from the wall outlet before cleaning ScreenInput/output terminals SpecificationsGeneral Rear view Dimensions Unit mmFront view Side viewDT-V9L3DY For U.S.A. and Canada AC 120 Important Safety Instructions Installation Lower position To prevent an accidental fall Daily Operations / Connections \ Others Rear panel Available signals Menu Configuration-MAIN Menu Safety Marker Menu Configuration-MAIN Menu Closed Caption Setting value OFF, CC1, CC2 Menu Configuration-SET-UP Menu Source ID, Wave FORM, C. C Wave form monitor display*7 Off Closed caption display Using the RS-232C system Troubleshooting Self-check program Maintenance DT-V9L3DY Higher position Lower position Dimensions Unit mm inchWhen the stand is attached to Page DT-V9L3DY Multi Format LCD Monitor

DT-V9L3D, DT-V9L3DY specifications

The JVC DT-V9L3D and DT-V9L3DY are high-performance broadcast-grade monitors designed for professional video production environments. With their advanced technologies and features, these monitors provide exceptional color accuracy, sharpness, and detail, making them an ideal choice for both studio and on-location setups.

One of the standout features of the DT-V9L3D and DT-V9L3DY is their 9-inch LCD display with a native resolution of 1920x1080 pixels. This high-definition display ensures that content creators can view their footage in stunning clarity. The monitors utilize IPS technology, which delivers wide viewing angles and consistent color reproduction across the screen. This is particularly beneficial for collaborative work in multi-user environments where multiple professionals need to view the same content simultaneously.

In terms of color accuracy, the JVC DT-V9L3D and DT-V9L3DY monitors excel with their ability to reproduce 100% of the sRGB color space. This level of precision is crucial for cinematographers and video editors who require accurate color representation for grading and correction tasks. Moreover, the monitors come equipped with various color calibration tools, allowing users to calibrate the display to match specific standards or preferences, ensuring consistent results across different viewing devices.

Both models are equipped with a variety of input options, including HDMI, SDI, and RGB connections. The DT-V9L3DY variant additionally supports 3G-SDI input, which is particularly useful for handling high-bandwidth video signals often required in professional broadcast settings. This versatility in connectivity makes these monitors suitable for different production workflows, whether in traditional studio environments or during mobile shoots.

Another notable characteristic is the built-in waveform monitor and vector scope functionality. These tools enable users to precisely analyze their video signals, making it easier to adjust exposure, color balance, and other key aspects of the footage in real time. This integrated functionality reduces the need for separate equipment and streamlines the workflow, making the JVC DT-V9L3D and DT-V9L3DY highly efficient solutions for video production.

In addition to their technical features, the design of the monitors is user-friendly, with intuitive controls and a compact form factor. Their lightweight design makes them easy to transport and mount in various setups. Overall, the JVC DT-V9L3D and DT-V9L3DY stand out as reliable, high-quality monitors that cater to the demands of professionals seeking exceptional performance and accuracy in their video production projects.
Top Page Image Contents