JVC DT-V9L3DY specifications Others

Page 29

Menu Operations

1 Display the menu.

To display the MAIN MENU

\Press MENU button.

To display the SET-UP MENU

\Press button while holding button.

MAIN MENU

Selected item

Operation guide

SET-UP MENU

Selected item

Operation guide

2 Press buttons to select an item, then press button.

•For some items, adjustments will be made by

pressing .

Ex.: When “MARKER” in the MAIN

MENU is selected

3 Press buttons to select an item,

then press buttons to make adjustments.

4 Press MENU button to finish the menu operation.

•Pressing MENU button repeatedly deactivates the display of the menu.

Audio Channel Selection

Select audio channels emitted from the speaker and the AUDIO (MONITOR OUT) OUT1/OUT2 terminals, when EMBEDDED AUDIO signals come in to the E. AUDIO HD/SD SDI terminal (IN1 or IN2) and SDI input (1 or 2) is selected.

•The speaker emits the same audio signal emitted from the AUDIO (MONITOR OUT) OUT 1 terminal.

•The setting is memorized for each input (SDI 1 and SDI 2).

1 Press or button when a menu is not displayed.

The screen for audio channel selection is displayed.

•The screen for audio channel selection automatically disappears in about 30 seconds after the previous operation.

Audio channel selection screen

Selected item

2 Press buttons to select the channel to set.

•E.AUDIO OUT1/SP:

AUDIO (MONITOR OUT) OUT1 terminal and the speaker.

•E.AUDIO OUT2:

AUDIO (MONITOR OUT) OUT2 terminal.

3 Press buttons to select an audio channel.

Each time you press the button, the audio channel changes as follows: 1/2/3/4/5/6/7/8/9/10/11/12/1+2/3+4/5+6/7+8/ 9+10/11+12/1G(1–4)/2G(5–8)/3G(9–12)/ 1G+2G(1–8)/1-3G(1–12)

4 Press MENU button.

The screen for audio channel selection disappears.

On the Information Display

The monitor displays the information below depending on the settings of the menu.

1Audio level meter

•Not displayed when no signal comes in for the SDI inputs or “LEVEL METER ch” is set to “OFF.”

☞“AUDIO SETTING” and “NOTE” on page 12

2 Signal format

• Displayed when “STATUS DISPLAY” is set to “ON.” (☞ “INFORMATION” on page 15)

• For the contents displayed, see “On the signal format” below and “Available signals” on page 9.

3 Source name assigned in “CHARACTER SET.”

• Displayed when “SOURCE ID” is set to “ON.”

• Displayed in large letters when “STATUS DISPLAY” is set to “OFF” or “AUTO.”

☞“INFORMATION” on page 15

4Time code

•Displayed when “TIME CODE” is set to “ON.” (☞ “TIME CODE” on page 11)

•When the input signal includes no time code, “TC – –:– –:– –:– –” is displayed.

5CRC error indication

•Displayed when “CRC ERROR” is set to “ON.” (☞ “INFORMATION” on page 15)

•A red square is displayed when an error occurs.

On the Status Display

If you press the input button of the current input, the status of the input signal and setting of muting are displayed for about 3 seconds.

•Make the setting to display/hide the status in “STATUS DISPLAY” of the “INFORMATION” (☞ page 15).

•When “STATUS DISPLAY” is set to “AUTO” or “ON,” the status below is also displayed in the following cases:

–When you change the input

–When the signal condition of the current input changes

–When you turn on the monitor

•When “STATUS DISPLAY” is set to “ON,” the signal format will remain displayed 3 seconds after the status is displayed.

1Signal format

•For the contents displayed, see “On the signal format” below and “Available signals” on page 9.

2Setting of “VIDEO/COMPO. SEL.”

☞page 10

3Setting of “MUTING”

•Displayed only when muting is activated. ☞ “ 5 MUTING button” on page 6

On the signal format

The following messages appear depending on the type of input signals and their conditions.

When no video signal comes in

\“NO SYNC”

When a noncompliant video signal comes in

\“Out of range”

When “COLOR SYSTEM” (☞ “FUNCTION

SETTING” on page 14) is set to “AUTO” and the noncompliant composite video signals come in

\“OTHERS”

7

Page 28 Page 30
Image 29
Page 28 Page 30
Contents DT-V9L3D How to replace the fuse Safety PrecautionsRating label is on the bottom of the monitor These openings must not be blocked or coveredCable Dear CustomerEuropean Union Business users Other Countries outside the European UnionTo adjust the stand height InstallationHigher position Align as illustratedWall or a pillar using durable string Fix the monitor to a wall by using stringsLower position To prevent an accidental fall Fixing the monitorFront panel Display the menu Press or button when a menu is not displayedPress buttons to select an item, then press button Press buttons to select the channel to setRear panel Video signals Available signalsFollowing signals are available for this monitor Operation guide Setting value OFF, onSetting value 43 Time Code Setting value OFF, on Setting of Area MARKER, Safety MARKER, R-AREA MarkerSettings for marker functions 1/2 When CH Arrange is set Settings for the level meterWhen BAR Type is set Level meter with no signalSettings for the wave form monitor Ex. When Marking is set to on and Level is set toSettings for the synchronization with signals Example of the wave form monitorColor of the format indicator Settings of sub menu PosiLights in orange composite signal Operation guide Shows the buttons for each operationControl Lock Setting value OFF, on Setting of Character SETSettings for the information display of the monitor About the external control Using the MAKE/TRIGGER systemExternal Control Communication specifications Using the RS-232C systemCommand outline Basic command listTroubleshooting From the DC in terminal Self-check programCheck which lamps are flashing Unplug this product from the wall outlet before cleaning MaintenanceScreen CabinetInput/output terminals SpecificationsGeneral Front view Dimensions Unit mmSide view Rear viewDT-V9L3DY For U.S.A. and Canada AC 120 Important Safety Instructions Installation Lower position To prevent an accidental fall Daily Operations / Connections \ Others Rear panel Available signals Menu Configuration-MAIN Menu Safety Marker Menu Configuration-MAIN Menu Closed Caption Setting value OFF, CC1, CC2 Menu Configuration-SET-UP Menu Source ID, Wave FORM, C. C Wave form monitor display*7 Off Closed caption display Using the RS-232C system Troubleshooting Self-check program Maintenance DT-V9L3DY Higher position Lower position Dimensions Unit mm inchWhen the stand is attached to Page DT-V9L3DY Multi Format LCD Monitor

DT-V9L3D, DT-V9L3DY specifications

The JVC DT-V9L3D and DT-V9L3DY are high-performance broadcast-grade monitors designed for professional video production environments. With their advanced technologies and features, these monitors provide exceptional color accuracy, sharpness, and detail, making them an ideal choice for both studio and on-location setups.

One of the standout features of the DT-V9L3D and DT-V9L3DY is their 9-inch LCD display with a native resolution of 1920x1080 pixels. This high-definition display ensures that content creators can view their footage in stunning clarity. The monitors utilize IPS technology, which delivers wide viewing angles and consistent color reproduction across the screen. This is particularly beneficial for collaborative work in multi-user environments where multiple professionals need to view the same content simultaneously.

In terms of color accuracy, the JVC DT-V9L3D and DT-V9L3DY monitors excel with their ability to reproduce 100% of the sRGB color space. This level of precision is crucial for cinematographers and video editors who require accurate color representation for grading and correction tasks. Moreover, the monitors come equipped with various color calibration tools, allowing users to calibrate the display to match specific standards or preferences, ensuring consistent results across different viewing devices.

Both models are equipped with a variety of input options, including HDMI, SDI, and RGB connections. The DT-V9L3DY variant additionally supports 3G-SDI input, which is particularly useful for handling high-bandwidth video signals often required in professional broadcast settings. This versatility in connectivity makes these monitors suitable for different production workflows, whether in traditional studio environments or during mobile shoots.

Another notable characteristic is the built-in waveform monitor and vector scope functionality. These tools enable users to precisely analyze their video signals, making it easier to adjust exposure, color balance, and other key aspects of the footage in real time. This integrated functionality reduces the need for separate equipment and streamlines the workflow, making the JVC DT-V9L3D and DT-V9L3DY highly efficient solutions for video production.

In addition to their technical features, the design of the monitors is user-friendly, with intuitive controls and a compact form factor. Their lightweight design makes them easy to transport and mount in various setups. Overall, the JVC DT-V9L3D and DT-V9L3DY stand out as reliable, high-quality monitors that cater to the demands of professionals seeking exceptional performance and accuracy in their video production projects.
Top Page Image Contents