JVC DT-V9L3DY specifications Closed Caption Setting value OFF, CC1, CC2

Page 35

Operation guide

Shows the buttons for each operation.

•The menu automatically disappears in about 30 seconds after the previous operation.

•Some items may not appear on the menu depending on the input or the input signal.

•The items controlled by the MAKE system do not appear on the menu.

NOTE

Example of the wave form monitor

Ex.: When “MARKING” is set to “ON” and “LEVEL” is set to “080”

Red

White

• The wave which goes over the value set on “LEVEL” is indicated in red.

 

Video signal

Start

End

WAVE FORM SETTING

Settings for the wave form monitor

Item

To do

Setting value

POSITION

Select the position of the wave form monitor.

1 (lower right), 2 (lower left), 3 (upper left),

 

 

 

4 (upper right)

GAIN

Adjust the gain level for the incoming wave form

–10 – +10

 

 

data.

 

OVER LEVEL

Select the over level for the incoming luminance

☞ “NOTE”

 

 

signals.

 

 

MARKING

Activates/deactivates the function to change the

OFF, ON

 

 

color of a wave form when the signal exceeds the

 

 

 

limit specified on “LEVEL” (☞ below).

 

 

LEVEL

Adjust the lower limit for the luminance signal

070 –109

AUTO OFF

Activates/deactivates the function to make the

ON, OFF

 

 

wave form monitor indication go off automatically

 

 

 

15 minutes after displaying it.

 

SYNC FUNCTION

Settings for the synchronization with signals

Item

To do

Setting value

NO SYNC ACTION

Select the screen status when no signal is

OFF,

 

coming in.

P.SAVE (power save mode),

 

 

GRAY B. (gray screen)

DELAY TIME

Select the period until the screen status

30sec., 5min., 15min.

 

changes as selected in “NO SYNC ACTION”

 

 

after signals stop coming in.

 

•When setting “NO SYNC ACTION” to “GRAY B.,” the screen color changes to gray and the power consumption of the back light is saved by half.

Selecting “P.SAVE” (power save mode) saves more power consumption by turning off the back light.

CLOSED CAPTION Setting value: OFF, CC1, CC2

Selects the type of closed caption for analog composite signals (NTSC and B/W60 only).

• Regardless of the setting, the closed caption is not displayed when the wave form monitor is displayed.

13

Page 34 Page 36
Image 35
Page 34 Page 36
Contents DT-V9L3D These openings must not be blocked or covered Safety PrecautionsHow to replace the fuse Rating label is on the bottom of the monitorBusiness users Other Countries outside the European Union Dear CustomerCable European UnionAlign as illustrated InstallationTo adjust the stand height Higher positionFixing the monitor Fix the monitor to a wall by using stringsWall or a pillar using durable string Lower position To prevent an accidental fallFront panel Press buttons to select the channel to set Press or button when a menu is not displayedDisplay the menu Press buttons to select an item, then press buttonRear panel Video signals Available signalsFollowing signals are available for this monitor Operation guide Setting value OFF, onSetting value 43 Time Code Setting value OFF, on Setting of Area MARKER, Safety MARKER, R-AREA MarkerSettings for marker functions 1/2 Level meter with no signal Settings for the level meterWhen CH Arrange is set When BAR Type is setExample of the wave form monitor Ex. When Marking is set to on and Level is set toSettings for the wave form monitor Settings for the synchronization with signalsOperation guide Shows the buttons for each operation Settings of sub menu PosiColor of the format indicator Lights in orange composite signalControl Lock Setting value OFF, on Setting of Character SETSettings for the information display of the monitor About the external control Using the MAKE/TRIGGER systemExternal Control Basic command list Using the RS-232C systemCommunication specifications Command outlineTroubleshooting From the DC in terminal Self-check programCheck which lamps are flashing Cabinet MaintenanceUnplug this product from the wall outlet before cleaning ScreenInput/output terminals SpecificationsGeneral Rear view Dimensions Unit mmFront view Side viewDT-V9L3DY For U.S.A. and Canada AC 120 Important Safety Instructions Installation Lower position To prevent an accidental fall Daily Operations / Connections \ Others Rear panel Available signals Menu Configuration-MAIN Menu Safety Marker Menu Configuration-MAIN Menu Closed Caption Setting value OFF, CC1, CC2 Menu Configuration-SET-UP Menu Source ID, Wave FORM, C. C Wave form monitor display*7 Off Closed caption display Using the RS-232C system Troubleshooting Self-check program Maintenance DT-V9L3DY Higher position Lower position Dimensions Unit mm inchWhen the stand is attached to Page DT-V9L3DY Multi Format LCD Monitor

DT-V9L3D, DT-V9L3DY specifications

The JVC DT-V9L3D and DT-V9L3DY are high-performance broadcast-grade monitors designed for professional video production environments. With their advanced technologies and features, these monitors provide exceptional color accuracy, sharpness, and detail, making them an ideal choice for both studio and on-location setups.

One of the standout features of the DT-V9L3D and DT-V9L3DY is their 9-inch LCD display with a native resolution of 1920x1080 pixels. This high-definition display ensures that content creators can view their footage in stunning clarity. The monitors utilize IPS technology, which delivers wide viewing angles and consistent color reproduction across the screen. This is particularly beneficial for collaborative work in multi-user environments where multiple professionals need to view the same content simultaneously.

In terms of color accuracy, the JVC DT-V9L3D and DT-V9L3DY monitors excel with their ability to reproduce 100% of the sRGB color space. This level of precision is crucial for cinematographers and video editors who require accurate color representation for grading and correction tasks. Moreover, the monitors come equipped with various color calibration tools, allowing users to calibrate the display to match specific standards or preferences, ensuring consistent results across different viewing devices.

Both models are equipped with a variety of input options, including HDMI, SDI, and RGB connections. The DT-V9L3DY variant additionally supports 3G-SDI input, which is particularly useful for handling high-bandwidth video signals often required in professional broadcast settings. This versatility in connectivity makes these monitors suitable for different production workflows, whether in traditional studio environments or during mobile shoots.

Another notable characteristic is the built-in waveform monitor and vector scope functionality. These tools enable users to precisely analyze their video signals, making it easier to adjust exposure, color balance, and other key aspects of the footage in real time. This integrated functionality reduces the need for separate equipment and streamlines the workflow, making the JVC DT-V9L3D and DT-V9L3DY highly efficient solutions for video production.

In addition to their technical features, the design of the monitors is user-friendly, with intuitive controls and a compact form factor. Their lightweight design makes them easy to transport and mount in various setups. Overall, the JVC DT-V9L3D and DT-V9L3DY stand out as reliable, high-quality monitors that cater to the demands of professionals seeking exceptional performance and accuracy in their video production projects.
Top Page Image Contents