JVC DT-V9L3DY specifications Wave form monitor display*7 Off Closed caption display

Page 38

External Control

7About the external control

This monitor has two external control terminals.

•MAKE/TRIGGER terminal (RJ-45): The following external control systems are available.

(1)MAKE (make contact) system: Controls the monitor by short-circuiting the corresponding pin terminal to the GND pin terminal, or disconnecting (opening) it (☞ below).

(2)TRIGGER (trigger) system: Controls the monitor by sending the pulse signal instantaneously to the corresponding pin terminal (☞ below).

•RS-232C terminal (D-sub 9-pin): Controls the monitor with the RS-232C system. (☞ page 17)

•Control priority is as follows.

MAKE > TRIGGER, RS-232C, buttons and menu on the monitor

•You can use the external control even when “CONTROL LOCK” is set to “ON” (☞ page 15).

•When the monitor is off (on standby), external control is not available.

7Using the MAKE/TRIGGER system

You can control the monitor by a personal computer or dedicated controller*1.

*1 The controller is not commercially available. Consult your dealer if you need it.

The MAKE/TRIGGER terminal is configured as follows. You can assign a function to each pin terminal in “REMOTE SETTING” (☞ “PIN1, PIN2, PIN3, PIN4, PIN5” on page 15).

 

Pin No.

Pin name

Pin No.

Pin name

This is a female

1

PIN1

5

PIN5

terminal.

2

PIN2

6

PIN6 (TALLY)*2

 

3

PIN3

7

PIN7 (ENABLE)*3

 

4

PIN4

8

PIN8 (GND)

*2 The 6th pin terminal controls turning on or off the tally lamp (available to control even when the 7th pin terminal is invalid.)

*3 The 7th pin terminal makes the external control valid/invalid. Make sure to control the terminal by the MAKE system.

•You cannot change the functions assigned to the pin terminals from 6th to 8th.

•When “FORMAT INDICATOR” in “FUNCTION SETTING” is set to “ON,” the TALLY lamp cannot be controlled by the external control (☞ page 14)

•You cannot assign the same function to different pin terminals.

•The TRIGGER system switches each function by short-circuiting the pin terminal for about 1 second and opening it.

To assign the functions to the pin terminals

For the operation procedure, see page 7.

1Select “REMOTE SETTING” on the SET-UP MENU.

2Set “TYPE SEL.” to “SET.”

3Select a pin name (“PIN1” – “PIN5”) for which you want to assign a function, then select the function you want to assign.

• For selectable functions, see the table on the right.

 

 

 

16

Functions controlled by the MAKE/TRIGGER system

 

 

 

 

 

 

 

 

Display

Functions to be controlled

Opening

 

Short-circuiting

TALLY SEL

Selects the color of the tally lamp.

Green

 

Red

SDI 1

Changes the input to “SDI 1.”

Invalid

 

Valid

SDI 2

Changes the input to “SDI 2.”

Invalid

 

Valid

VIDEO/COMPO.

Changes the input to “VIDEO/COMPO.”

Invalid

 

Valid

MARKER

The area marker and the safety marker indication

Off

 

On

FRAME

Indication of the area of the specified aspect ratio

Off

 

On

C.MARKER

The center marker indication

Off

 

On

MARK.SEL

Selects the items of “MARKER”*4

Non-“R-” items

 

“R-” items

ASPECT

Changes the aspect ratio.

4:3

 

16:9

STATUS

Status display*5

☞ “On the Status Display” on page 7

L.METER

Audio level meter display

 

*6

TIME CODE

Time code display

Off

 

On

SOURCE ID

☞ “SOURCE ID” on page 15

Off

 

On

WAVE FORM

Wave form monitor display*7

Off

 

On

C. C.

Closed caption display

 

*8

COLOR OFF

Color off

Color

 

Monochrome

SCR CHECK

Screens check

 

*9

DYNAMIC

Adjusts the picture to be suitable for a bright place.

Off

 

On

FOCUS ASSIST

Helps to focus the picture.

Off

 

On

COLOR RANGE

Reduces the difference of the luminance level specific to

Off

 

On

 

the LCD panel.

 

 

 

 

 

MUTING

Muting on/off

Off

 

On

— — —

No function

—

 

—

*4 Selects which functions in “MARKER” are activated, non-“R-” items or “R-” items (☞ page 11).

*5 Displays the information shown when the button of the current input is pressed (☞ “On the Status Display” on page 7). While controlling with the MAKE system, the information is displayed only at the moment of short-circuiting.

*6 While controlling with the MAKE system, the level meter is switched between displayed (short-circuiting) and hidden (opening). When “LEVEL METER ch” is set to “OFF,” the level meter is not displayed (“NO EFFECT” appears). While controlling with the TRIGGER system, the number of the audio channels displayed is changed (between OFF, 12CH and 8CH).

*7 While controlling with the MAKE system, the wave form monitor will not disappear until opening the terminal even when “AUTO OFF” is set to “ON.”

*8 For analog composite signals (NTSC and B/W60 only). While controlling with the MAKE system, the closed caption is switched between displayed (short-circuiting) and hidden (opening). When “CLOSED CAPTION” is set to “OFF,” the closed caption is not displayed (“NO EFFECT” appears). While controlling with the TRIGGER system, the type of the closed caption can be selected.

*9 While controlling with the MAKE system, the screen is switched between normal screen (opening) and blue screen (short-circuiting). While controlling with the TRIGGER system, the screen changes as follows:

Normal screen

Red screen

Blue screen

Green screen

Page 37 Page 39
Image 38
Page 37 Page 39
Contents DT-V9L3D Rating label is on the bottom of the monitor Safety PrecautionsHow to replace the fuse These openings must not be blocked or coveredEuropean Union Dear CustomerCable Business users Other Countries outside the European UnionHigher position InstallationTo adjust the stand height Align as illustratedLower position To prevent an accidental fall Fix the monitor to a wall by using stringsWall or a pillar using durable string Fixing the monitorFront panel Press buttons to select an item, then press button Press or button when a menu is not displayedDisplay the menu Press buttons to select the channel to setRear panel Video signals Available signalsFollowing signals are available for this monitor Operation guide Setting value OFF, onSetting value 43 Time Code Setting value OFF, on Setting of Area MARKER, Safety MARKER, R-AREA MarkerSettings for marker functions 1/2 When BAR Type is set Settings for the level meterWhen CH Arrange is set Level meter with no signalSettings for the synchronization with signals Ex. When Marking is set to on and Level is set toSettings for the wave form monitor Example of the wave form monitorLights in orange composite signal Settings of sub menu PosiColor of the format indicator Operation guide Shows the buttons for each operationControl Lock Setting value OFF, on Setting of Character SETSettings for the information display of the monitor About the external control Using the MAKE/TRIGGER systemExternal Control Command outline Using the RS-232C systemCommunication specifications Basic command listTroubleshooting From the DC in terminal Self-check programCheck which lamps are flashing Screen MaintenanceUnplug this product from the wall outlet before cleaning CabinetInput/output terminals SpecificationsGeneral Side view Dimensions Unit mmFront view Rear viewDT-V9L3DY For U.S.A. and Canada AC 120 Important Safety Instructions Installation Lower position To prevent an accidental fall Daily Operations / Connections \ Others Rear panel Available signals Menu Configuration-MAIN Menu Safety Marker Menu Configuration-MAIN Menu Closed Caption Setting value OFF, CC1, CC2 Menu Configuration-SET-UP Menu Source ID, Wave FORM, C. C Wave form monitor display*7 Off Closed caption display Using the RS-232C system Troubleshooting Self-check program Maintenance DT-V9L3DY Higher position Lower position Dimensions Unit mm inchWhen the stand is attached to Page DT-V9L3DY Multi Format LCD Monitor

DT-V9L3D, DT-V9L3DY specifications

The JVC DT-V9L3D and DT-V9L3DY are high-performance broadcast-grade monitors designed for professional video production environments. With their advanced technologies and features, these monitors provide exceptional color accuracy, sharpness, and detail, making them an ideal choice for both studio and on-location setups.

One of the standout features of the DT-V9L3D and DT-V9L3DY is their 9-inch LCD display with a native resolution of 1920x1080 pixels. This high-definition display ensures that content creators can view their footage in stunning clarity. The monitors utilize IPS technology, which delivers wide viewing angles and consistent color reproduction across the screen. This is particularly beneficial for collaborative work in multi-user environments where multiple professionals need to view the same content simultaneously.

In terms of color accuracy, the JVC DT-V9L3D and DT-V9L3DY monitors excel with their ability to reproduce 100% of the sRGB color space. This level of precision is crucial for cinematographers and video editors who require accurate color representation for grading and correction tasks. Moreover, the monitors come equipped with various color calibration tools, allowing users to calibrate the display to match specific standards or preferences, ensuring consistent results across different viewing devices.

Both models are equipped with a variety of input options, including HDMI, SDI, and RGB connections. The DT-V9L3DY variant additionally supports 3G-SDI input, which is particularly useful for handling high-bandwidth video signals often required in professional broadcast settings. This versatility in connectivity makes these monitors suitable for different production workflows, whether in traditional studio environments or during mobile shoots.

Another notable characteristic is the built-in waveform monitor and vector scope functionality. These tools enable users to precisely analyze their video signals, making it easier to adjust exposure, color balance, and other key aspects of the footage in real time. This integrated functionality reduces the need for separate equipment and streamlines the workflow, making the JVC DT-V9L3D and DT-V9L3DY highly efficient solutions for video production.

In addition to their technical features, the design of the monitors is user-friendly, with intuitive controls and a compact form factor. Their lightweight design makes them easy to transport and mount in various setups. Overall, the JVC DT-V9L3D and DT-V9L3DY stand out as reliable, high-quality monitors that cater to the demands of professionals seeking exceptional performance and accuracy in their video production projects.
Top Page Image Contents