JVC DT-V9L3DY specifications Dear Customer, Cable, European Union

Page 3

WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

WARNING: THIS APPARATUS MUST BE CONNECTED TO A MAINS SOCKET OUTLET WITH A PROTECTIVE EARTHING CONNECTION.

CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.

REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.

Dear Customer,

This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety.

European representative of Victor Company of Japan, Limited is: JVC Technical Services Europe GmbH

Postfach 10 05 04

61145 Friedberg Germany

Information for Users on Disposal of Old Equipment

EMC Supplement

This equipment is in conformity with the provisions and protection requirements of the corresponding European Directives. This equipment is designed for professional video appliances and can be used in the following environments:

•Controlled EMC environment (for example purpose built broadcasting or recording studio), and rural outdoors environment (far away from railways, transmitters, overhead power lines, etc.)

In order to keep the best performance and ensure electromagnetic compatibility, we recommend to use cables not exceeding the following length:

Cable

Length

Power cord

2.0 m

(attached cable (H05VV-F 3 x 0.75 mm2))

 

Video signal cable (coaxial cable)

2.0 m

Audio signal cable (shielded cable)

1.5 m

RS-232C cable (shielded cable)

2.0 m

(A straight cable with a D-sub 9-pin connector)

 

REMOTE cable (twist pair cable)

2.0 m

(A straight LAN cable)

 

Earphone cable (parallel cable)

1.0 m

Attention:

This symbol is only valid in the European Union.

[European Union]

This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for the recycling of electrical and electronic equipment for proper treatment, recovery and recycling in accordance with your national legislation.

By disposing of this product correctly, you will help to conserve natural resources and will help prevent potential negative effects on the environment and human health which could otherwise be caused by inappropriate waste handling of this product. For more information about collection point and recycling of this product, please contact your local municipal office, your household waste disposal service or the shop where you purchased the product.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

(Business users)

If you wish to dispose of this product, please visit our web page http://www.jvc.eu/ to obtain information about the take-back of the product.

[Other Countries outside the European Union]

If you wish to dispose of this product, please do so in accordance with applicable national legislation or other rules in your country for the treatment of old electrical and electronic equipment.

The inrush current of this apparatus is 9.098 ampere.

CAUTION

In case where the strong electromagnetic waves or magnetism are near the audio cable or the signal cable, the sound or the picture will contain noise. In such cases, please keep the cable away from the sources of the disturbance.

ENGLISH3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents DT-V9L3D These openings must not be blocked or covered Safety PrecautionsHow to replace the fuse Rating label is on the bottom of the monitorBusiness users Other Countries outside the European Union Dear CustomerCable European UnionAlign as illustrated InstallationTo adjust the stand height Higher positionFixing the monitor Fix the monitor to a wall by using stringsWall or a pillar using durable string Lower position To prevent an accidental fallFront panel Press buttons to select the channel to set Press or button when a menu is not displayedDisplay the menu Press buttons to select an item, then press buttonRear panel Available signals Following signals are available for this monitorVideo signals Setting value OFF, on Setting value 43Operation guide Setting of Area MARKER, Safety MARKER, R-AREA Marker Settings for marker functions 1/2Time Code Setting value OFF, on Level meter with no signal Settings for the level meterWhen CH Arrange is set When BAR Type is setExample of the wave form monitor Ex. When Marking is set to on and Level is set toSettings for the wave form monitor Settings for the synchronization with signalsOperation guide Shows the buttons for each operation Settings of sub menu PosiColor of the format indicator Lights in orange composite signalSetting of Character SET Settings for the information display of the monitorControl Lock Setting value OFF, on Using the MAKE/TRIGGER system External ControlAbout the external control Basic command list Using the RS-232C systemCommunication specifications Command outlineTroubleshooting Self-check program Check which lamps are flashingFrom the DC in terminal Cabinet MaintenanceUnplug this product from the wall outlet before cleaning ScreenSpecifications GeneralInput/output terminals Rear view Dimensions Unit mmFront view Side viewDT-V9L3DY For U.S.A. and Canada AC 120 Important Safety Instructions Installation Lower position To prevent an accidental fall Daily Operations / Connections \ Others Rear panel Available signals Menu Configuration-MAIN Menu Safety Marker Menu Configuration-MAIN Menu Closed Caption Setting value OFF, CC1, CC2 Menu Configuration-SET-UP Menu Source ID, Wave FORM, C. C Wave form monitor display*7 Off Closed caption display Using the RS-232C system Troubleshooting Self-check program Maintenance DT-V9L3DY Dimensions Unit mm inch When the stand is attached toHigher position Lower position Page DT-V9L3DY Multi Format LCD Monitor

DT-V9L3D, DT-V9L3DY specifications

The JVC DT-V9L3D and DT-V9L3DY are high-performance broadcast-grade monitors designed for professional video production environments. With their advanced technologies and features, these monitors provide exceptional color accuracy, sharpness, and detail, making them an ideal choice for both studio and on-location setups.

One of the standout features of the DT-V9L3D and DT-V9L3DY is their 9-inch LCD display with a native resolution of 1920x1080 pixels. This high-definition display ensures that content creators can view their footage in stunning clarity. The monitors utilize IPS technology, which delivers wide viewing angles and consistent color reproduction across the screen. This is particularly beneficial for collaborative work in multi-user environments where multiple professionals need to view the same content simultaneously.

In terms of color accuracy, the JVC DT-V9L3D and DT-V9L3DY monitors excel with their ability to reproduce 100% of the sRGB color space. This level of precision is crucial for cinematographers and video editors who require accurate color representation for grading and correction tasks. Moreover, the monitors come equipped with various color calibration tools, allowing users to calibrate the display to match specific standards or preferences, ensuring consistent results across different viewing devices.

Both models are equipped with a variety of input options, including HDMI, SDI, and RGB connections. The DT-V9L3DY variant additionally supports 3G-SDI input, which is particularly useful for handling high-bandwidth video signals often required in professional broadcast settings. This versatility in connectivity makes these monitors suitable for different production workflows, whether in traditional studio environments or during mobile shoots.

Another notable characteristic is the built-in waveform monitor and vector scope functionality. These tools enable users to precisely analyze their video signals, making it easier to adjust exposure, color balance, and other key aspects of the footage in real time. This integrated functionality reduces the need for separate equipment and streamlines the workflow, making the JVC DT-V9L3D and DT-V9L3DY highly efficient solutions for video production.

In addition to their technical features, the design of the monitors is user-friendly, with intuitive controls and a compact form factor. Their lightweight design makes them easy to transport and mount in various setups. Overall, the JVC DT-V9L3D and DT-V9L3DY stand out as reliable, high-quality monitors that cater to the demands of professionals seeking exceptional performance and accuracy in their video production projects.
Top Page Image Contents