JVC DT-V9L3DY specifications Source ID, Wave FORM, C. C

Page 37

Operation guide Shows the buttons for each operation.

•The menu automatically disappears in about 30 seconds after the previous operation.

•Some items may not appear on the menu depending on the input or the input signal.

•The items controlled by the MAKE system do not appear on the menu.

NOTE

Setting of “CHARACTER SET.”

Assign a name for each video source.

1Change the input to one that you want to assign a video source name for.

• You cannot store different video source names for composite signal input (VIDEO) and component signal input (COMPO.).

2Select “CHARACTER SET.”

3Press buttons to select the first character.

•Each time you press button, the character changes as follows. Press button to reverse the order.

Space

4Press button to move the arrow to the next space.

• The characters entered before moving the arrow are memorized.

5Repeat steps 3 and 4 (10 characters at maximum).

6Press MENU button to store the name.

REMOTE SETTING (☞ “External Control” on pages 16, 17)

Settings for the external control

Item

To do

Setting value

TYPE SEL.

Select the external control method for the MAKE/

MAKE, TRIGGER, SET

 

TRIGGER terminal.

 

PIN1, PIN2, PIN3,

Assign the control functions to the pins of the MAKE/

TALLY SEL, SDI 1, SDI 2, VIDEO/

PIN4, PIN5

TRIGGER terminal.

COMPO., MARKER, FRAME,

 

• Assign a function to each pin terminal by selecting

C.MARKER, MARK.SEL, ASPECT,

 

“SET” in “TYPE SEL.” mentioned above. (The

STATUS, L.METER, TIME CODE,

 

functions are assigned for “PIN6” – “PIN8” and you

SOURCE ID, WAVE FORM, C. C.,

 

cannot change the assignment of these functions.)

COLOR OFF, SCR CHECK,

 

 

DYNAMIC, FOCUS ASSIST, COLOR

 

 

RANGE, MUTING, – – – (no function)

INFORMATION

Settings for the information display of the monitor

Item

To do

Setting value

SOURCE ID

Select if the name assigned in “CHARACTER SET.” is displayed on

OFF, ON

 

the screen (☞ “On the Information Display” on page 7).

 

 

 

 

CHARACTER SET.

Assign a name to each video source as you like (10 characters at

☞ “NOTE”

 

maximum). You can also enter a name using the RS-232C system.

 

STATUS DISPLAY

Select if the status of the current input and the setting of muting are

AUTO, OFF, ON

 

displayed on the screen (☞ “On the Status Display” on page 7).

 

CRC ERROR

Select if the CRC error indication for the input HD SDI signal is displayed

ON, OFF

 

on the screen (☞ “On the Information Display” on page 7).

 

SUB HOUR METER

Display the hours of use (unit: hour). You can reset this item.

 

MODEL

Display the model name of the monitor.

 

VERSION

Display the version of the monitor.

 

HOUR METER

Display the total hours of use (unit: hour). This item is used for maintenance of the monitor.

 

You cannot reset this item.

 

CONTROL LOCK Setting value: OFF, ON

Turns on (or off) the control lock function to disable the buttons on the front panel.

•The following operations are available even when this function is activated.

–Turning on/off (on standby) the monitor

–Displaying the SET-UP MENU (by pressing button while holding button) and turning “CONTROL LOCK” to “OFF”

–Operating the monitor by an external control

If you try other operations, “ Control lock on!” appears on the screen.

all reset

Restores all the settings and adjustments of the monitor to the default.

•“HOUR METER” and the settings done by using the adjustment knobs on the front panel will not be reset.

•When you operate the monitor with the AC power supply, the monitor is turned off (on standby) then turned on automatically. When you operate the monitor with the DC 12 V power supply, the monitor is turned off (on standby).

15

Page 36 Page 38
Image 37
Page 36 Page 38
Contents DT-V9L3D How to replace the fuse Safety PrecautionsRating label is on the bottom of the monitor These openings must not be blocked or coveredCable Dear CustomerEuropean Union Business users Other Countries outside the European UnionTo adjust the stand height InstallationHigher position Align as illustratedWall or a pillar using durable string Fix the monitor to a wall by using stringsLower position To prevent an accidental fall Fixing the monitorFront panel Display the menu Press or button when a menu is not displayedPress buttons to select an item, then press button Press buttons to select the channel to setRear panel Following signals are available for this monitor Available signalsVideo signals Setting value 43 Setting value OFF, onOperation guide Settings for marker functions 1/2 Setting of Area MARKER, Safety MARKER, R-AREA MarkerTime Code Setting value OFF, on When CH Arrange is set Settings for the level meterWhen BAR Type is set Level meter with no signalSettings for the wave form monitor Ex. When Marking is set to on and Level is set toSettings for the synchronization with signals Example of the wave form monitorColor of the format indicator Settings of sub menu PosiLights in orange composite signal Operation guide Shows the buttons for each operationSettings for the information display of the monitor Setting of Character SETControl Lock Setting value OFF, on External Control Using the MAKE/TRIGGER systemAbout the external control Communication specifications Using the RS-232C systemCommand outline Basic command listTroubleshooting Check which lamps are flashing Self-check programFrom the DC in terminal Unplug this product from the wall outlet before cleaning MaintenanceScreen CabinetGeneral SpecificationsInput/output terminals Front view Dimensions Unit mmSide view Rear viewDT-V9L3DY For U.S.A. and Canada AC 120 Important Safety Instructions Installation Lower position To prevent an accidental fall Daily Operations / Connections \ Others Rear panel Available signals Menu Configuration-MAIN Menu Safety Marker Menu Configuration-MAIN Menu Closed Caption Setting value OFF, CC1, CC2 Menu Configuration-SET-UP Menu Source ID, Wave FORM, C. C Wave form monitor display*7 Off Closed caption display Using the RS-232C system Troubleshooting Self-check program Maintenance DT-V9L3DY When the stand is attached to Dimensions Unit mm inchHigher position Lower position Page DT-V9L3DY Multi Format LCD Monitor

DT-V9L3D, DT-V9L3DY specifications

The JVC DT-V9L3D and DT-V9L3DY are high-performance broadcast-grade monitors designed for professional video production environments. With their advanced technologies and features, these monitors provide exceptional color accuracy, sharpness, and detail, making them an ideal choice for both studio and on-location setups.

One of the standout features of the DT-V9L3D and DT-V9L3DY is their 9-inch LCD display with a native resolution of 1920x1080 pixels. This high-definition display ensures that content creators can view their footage in stunning clarity. The monitors utilize IPS technology, which delivers wide viewing angles and consistent color reproduction across the screen. This is particularly beneficial for collaborative work in multi-user environments where multiple professionals need to view the same content simultaneously.

In terms of color accuracy, the JVC DT-V9L3D and DT-V9L3DY monitors excel with their ability to reproduce 100% of the sRGB color space. This level of precision is crucial for cinematographers and video editors who require accurate color representation for grading and correction tasks. Moreover, the monitors come equipped with various color calibration tools, allowing users to calibrate the display to match specific standards or preferences, ensuring consistent results across different viewing devices.

Both models are equipped with a variety of input options, including HDMI, SDI, and RGB connections. The DT-V9L3DY variant additionally supports 3G-SDI input, which is particularly useful for handling high-bandwidth video signals often required in professional broadcast settings. This versatility in connectivity makes these monitors suitable for different production workflows, whether in traditional studio environments or during mobile shoots.

Another notable characteristic is the built-in waveform monitor and vector scope functionality. These tools enable users to precisely analyze their video signals, making it easier to adjust exposure, color balance, and other key aspects of the footage in real time. This integrated functionality reduces the need for separate equipment and streamlines the workflow, making the JVC DT-V9L3D and DT-V9L3DY highly efficient solutions for video production.

In addition to their technical features, the design of the monitors is user-friendly, with intuitive controls and a compact form factor. Their lightweight design makes them easy to transport and mount in various setups. Overall, the JVC DT-V9L3D and DT-V9L3DY stand out as reliable, high-quality monitors that cater to the demands of professionals seeking exceptional performance and accuracy in their video production projects.
Top Page Image Contents