JVC DT-V9L3DY Settings for the level meter, When CH Arrange is set, To DIVIDE, odd channels are

Page 12

Menu Configuration—MAIN MENU (cont.)

Operation guide

Shows the buttons for each operation.

•The menu automatically disappears in about 30 seconds after the previous operation.

•Some items may not appear on the menu depending on the input or the input signal.

•The items controlled by the MAKE system do not appear on the menu.

12

AUDIO SETTING

Settings for the level meter

Item

To do

Setting value

BAR POSITION

Select the type of the level meter display

VERT. (vertically), HORZ. (horizontally)

 

— vertically or horizontally.

 

LEVEL METER ch

Select the number of the audio channels

OFF, 12CH, 8CH

 

displayed on the level meter.

 

CH ARRANGE

Select the order of the audio channels

LINE, DIVIDE (☞ “NOTE”)

 

displayed on the level meter.

 

BAR TYPE

Select the color of the level meter display.

3COLORS (3 colors to indicate variations in

 

 

input levels), W.100 (white), W.50 (half tone)

REFERENCE LEVEL

Select the standard input level indicated on the

–20dB, –18dB

 

level meter.

 

OVER LEVEL

Select the input level’s lower limit indicated in

–10dB, –8dB, –6dB, –4dB, –2dB

 

red for the “3COLORS” display.

 

BAR BRIGHTNESS

Select the brightness of the level meter.

LOW, HIGH

NOTE

Example of the level meter display—Level meter position and audio channels

Ex.: When “LEVEL METER ch” is set to “8CH” and “BAR TYPE” is set to “3COLORS.”

REFERENCE LEVEL OVER LEVEL

Red

Green

 

Yellow

Ex.: BAR POSITION: HORZ.,

CH ARRANGE: LINE

OVER LEVEL

Red

Yellow

Green

REFERENCE LEVEL

REFERENCE LEVEL

 

 

OVER LEVEL

 

• When “CH ARRANGE” is set

 

 

 

to “DIVIDE,” odd channels are

 

 

 

displayed on the left and even

Red

Green

 

channels are displayed on the

 

right.

 

Yellow

 

 

• When “BAR TYPE” is set

Ex.: BAR POSITION: HORZ.,

 

to “W.100” or “W.50,” the

CH ARRANGE: DIVIDE

 

 

standard input level set in

 

 

 

 

OVER LEVEL

 

the “REFERENCE LEVEL”

 

 

is displayed with the line

 

Red

 

 

Yellow

 

indication. The input level set in

 

 

“OVER LEVEL” is not displayed.

 

Green

 

 

•

The level meter with no signal

 

 

 

 

 

input is displayed in white for

 

 

 

“3COLORS,” and in gray for

REFERENCE LEVEL

 

“W.100” or “W.50.”

Ex.: BAR POSITION: VERT.,

Ex.: BAR POSITION: VERT.,

CH ARRANGE: LINE

CH ARRANGE: DIVIDE

Page 11 Page 13
Image 12
Page 11 Page 13
Contents DT-V9L3D Safety Precautions How to replace the fuseRating label is on the bottom of the monitor These openings must not be blocked or coveredDear Customer CableEuropean Union Business users Other Countries outside the European UnionInstallation To adjust the stand heightHigher position Align as illustratedFix the monitor to a wall by using strings Wall or a pillar using durable stringLower position To prevent an accidental fall Fixing the monitorFront panel Press or button when a menu is not displayed Display the menuPress buttons to select an item, then press button Press buttons to select the channel to setRear panel Available signals Following signals are available for this monitorVideo signals Setting value OFF, on Setting value 43Operation guide Setting of Area MARKER, Safety MARKER, R-AREA Marker Settings for marker functions 1/2Time Code Setting value OFF, on Settings for the level meter When CH Arrange is setWhen BAR Type is set Level meter with no signalEx. When Marking is set to on and Level is set to Settings for the wave form monitorSettings for the synchronization with signals Example of the wave form monitorSettings of sub menu Posi Color of the format indicatorLights in orange composite signal Operation guide Shows the buttons for each operationSetting of Character SET Settings for the information display of the monitorControl Lock Setting value OFF, on Using the MAKE/TRIGGER system External ControlAbout the external control Using the RS-232C system Communication specificationsCommand outline Basic command listTroubleshooting Self-check program Check which lamps are flashingFrom the DC in terminal Maintenance Unplug this product from the wall outlet before cleaningScreen CabinetSpecifications GeneralInput/output terminals Dimensions Unit mm Front viewSide view Rear viewDT-V9L3DY For U.S.A. and Canada AC 120 Important Safety Instructions Installation Lower position To prevent an accidental fall Daily Operations / Connections \ Others Rear panel Available signals Menu Configuration-MAIN Menu Safety Marker Menu Configuration-MAIN Menu Closed Caption Setting value OFF, CC1, CC2 Menu Configuration-SET-UP Menu Source ID, Wave FORM, C. C Wave form monitor display*7 Off Closed caption display Using the RS-232C system Troubleshooting Self-check program Maintenance DT-V9L3DY Dimensions Unit mm inch When the stand is attached toHigher position Lower position Page DT-V9L3DY Multi Format LCD Monitor

DT-V9L3D, DT-V9L3DY specifications

The JVC DT-V9L3D and DT-V9L3DY are high-performance broadcast-grade monitors designed for professional video production environments. With their advanced technologies and features, these monitors provide exceptional color accuracy, sharpness, and detail, making them an ideal choice for both studio and on-location setups.

One of the standout features of the DT-V9L3D and DT-V9L3DY is their 9-inch LCD display with a native resolution of 1920x1080 pixels. This high-definition display ensures that content creators can view their footage in stunning clarity. The monitors utilize IPS technology, which delivers wide viewing angles and consistent color reproduction across the screen. This is particularly beneficial for collaborative work in multi-user environments where multiple professionals need to view the same content simultaneously.

In terms of color accuracy, the JVC DT-V9L3D and DT-V9L3DY monitors excel with their ability to reproduce 100% of the sRGB color space. This level of precision is crucial for cinematographers and video editors who require accurate color representation for grading and correction tasks. Moreover, the monitors come equipped with various color calibration tools, allowing users to calibrate the display to match specific standards or preferences, ensuring consistent results across different viewing devices.

Both models are equipped with a variety of input options, including HDMI, SDI, and RGB connections. The DT-V9L3DY variant additionally supports 3G-SDI input, which is particularly useful for handling high-bandwidth video signals often required in professional broadcast settings. This versatility in connectivity makes these monitors suitable for different production workflows, whether in traditional studio environments or during mobile shoots.

Another notable characteristic is the built-in waveform monitor and vector scope functionality. These tools enable users to precisely analyze their video signals, making it easier to adjust exposure, color balance, and other key aspects of the footage in real time. This integrated functionality reduces the need for separate equipment and streamlines the workflow, making the JVC DT-V9L3D and DT-V9L3DY highly efficient solutions for video production.

In addition to their technical features, the design of the monitors is user-friendly, with intuitive controls and a compact form factor. Their lightweight design makes them easy to transport and mount in various setups. Overall, the JVC DT-V9L3D and DT-V9L3DY stand out as reliable, high-quality monitors that cater to the demands of professionals seeking exceptional performance and accuracy in their video production projects.
Top Page Image Contents