JVC DT-V9L3DY specifications Rear panel

Page 30

Daily Operations / Connections (cont.)

7 Rear panel

 

1 POWER switch

 

 

Turns AC power on or off.

 

 

• You need to press

button (☞ w on page 6)

 

 

to use the monitor after turning on the POWER

 

 

switch.

 

 

2 AC IN terminal

 

 

AC power input connector.

 

Connect the provided AC power cord to an AC

 

outlet.

 

 

•

Attach the provided power cord holder to prevent

 

 

accidental disconnection of the AC power cord (☞

 

 

“Attaching the Power Cord Holder” on page 9).

 

3 DC switch

 

 

Turns the DC 12 V power on or off.

 

• You need to press

button (☞ w on page

 

 

6) on the front panel to turn on the monitor after

 

 

turning on the DC switch.

 

• The monitor consumes the battery even while the

 

 

monitor is on standby. To save battery life, turn

 

 

off the DC switch.

 

 

4 DC IN terminal

 

 

DC 12 V (maximum DC 17

 

V) power input connector.

 

CAUTION

•

While using both the

 

 

AC and DC 12 V power

 

Do not connect the power cord until all

 

 

other connections are completed.

 

supply, AC power supply

 

 

is preferentially used. If the AC power supply is

 

 

cut off (for example, when turning off the POWER

When using DC 12 V power (maximum DC 17 V),

 

switch), the power supply automatically switches

 

to the DC 12 V power supply.

check the DC IN terminal pin signal, and use the

 

 

 

correct polarity. If the polarity is reversed, this could cause a fire or personal injury.

5VIDEO/COMPONENT terminals (BNC)

IN: Input terminals for the composite (VBS) and the

analog component (Y/PB/PR) signals.

•Select the signal type in “VIDEO/COMPO. SEL.” corresponding to the type of the input signal (☞ page 10).

OUT: Output terminal for the composite (VBS) and the analog component (Y) signals.

6AUDIO IN terminal (pin jack)

Input terminal for the analog audio signals.

•Use this terminal for the analog audio connection of the SDI.

7E. AUDIO HD/SD SDI (SWITCHED OUT) terminal (BNC)

Output terminal for the HD/SD SDI signals.

•The SDI signals of the current input (SDI 1 or SDI 2) are re-clocked, then emitted.

•When an input other than SDI 1 and SDI 2 is selected, the SDI signal of the input selected last time is emitted from this terminal.

•The signals are emitted from this terminal only when the monitor is on or in “P.SAVE” (power save) mode.

8E. AUDIO HD/SD SDI (IN 1, IN 2) terminals (BNC) Input terminals for the HD/SD SDI signals.

•The terminals accept also EMBEDDED AUDIO signals including up to 12 audio channels with a sampling frequency of 48 kHz.

9AUDIO (MONITOR OUT) terminals (pin jack) Output terminals for the analog audio signal.

•The terminals emit the audio signals coming in from the AUDIO IN terminal or EMBEDDED AUDIO signals coming in from the E. AUDIO HD/ SD SDI (IN 1 or IN 2) input terminal. (☞ “Audio Channel Selection” on page 7)

•The signal is output from these terminals only when the monitor is on or in “P.SAVE” (power save) mode. (☞ “NO SYNC ACTION” in “SYNC FUNCTION” on page 13)

•The EMBEDDED AUDIO signal...

–is decoded into an analog signal, then emitted.

–is emitted only when “SDI 1” or “SDI 2” is selected, and when EMBEDDED AUDIO signals come in to the E. AUDIO HD/SD SDI (IN 1 or IN 2) terminal.

8

pREMOTE terminals

Terminals for controlling the monitor by an external control. (☞ “External Control” on page 16)

qCarry handle

Use this handle when carrying the monitor.

wSecurity slot

Attach a security wire to this slot.

eScrew holes for external battery attachment Attach external battery for DC 12 V power supply by using 2 screw holes. Choose the appropriate screw holes from 1, 2, 3 or 4, according to the type of external battery.

•Use the Anton Bauer Dionic 90 (mount: QR DXC- M3A) external battery.

CAUTION

•Do not use the external battery for DC 24 V power supply.

•Use only the battery specified above. If a heavy battery is used, it may fall off depending on the way the monitor is used.

Note for connections

•Before making any connections, turn off all the equipment.

•Use a cord whose plugs correctly match the terminals on this monitor and the equipment.

•Plugs should be firmly inserted; poor connections could cause noise.

•When unplugging a cord, be sure to grasp its plug and pull it out.

•DO NOT connect the power cord until all connections are complete.

•Refer also to the user manual of each piece of equipment.

Page 29 Page 31
Image 30
Page 29 Page 31
Contents DT-V9L3D Rating label is on the bottom of the monitor Safety PrecautionsHow to replace the fuse These openings must not be blocked or coveredEuropean Union Dear CustomerCable Business users Other Countries outside the European UnionHigher position InstallationTo adjust the stand height Align as illustratedLower position To prevent an accidental fall Fix the monitor to a wall by using stringsWall or a pillar using durable string Fixing the monitorFront panel Press buttons to select an item, then press button Press or button when a menu is not displayedDisplay the menu Press buttons to select the channel to setRear panel Available signals Following signals are available for this monitorVideo signals Setting value OFF, on Setting value 43Operation guide Setting of Area MARKER, Safety MARKER, R-AREA Marker Settings for marker functions 1/2Time Code Setting value OFF, on When BAR Type is set Settings for the level meterWhen CH Arrange is set Level meter with no signalSettings for the synchronization with signals Ex. When Marking is set to on and Level is set toSettings for the wave form monitor Example of the wave form monitorLights in orange composite signal Settings of sub menu PosiColor of the format indicator Operation guide Shows the buttons for each operationSetting of Character SET Settings for the information display of the monitorControl Lock Setting value OFF, on Using the MAKE/TRIGGER system External ControlAbout the external control Command outline Using the RS-232C systemCommunication specifications Basic command listTroubleshooting Self-check program Check which lamps are flashingFrom the DC in terminal Screen MaintenanceUnplug this product from the wall outlet before cleaning CabinetSpecifications GeneralInput/output terminals Side view Dimensions Unit mmFront view Rear viewDT-V9L3DY For U.S.A. and Canada AC 120 Important Safety Instructions Installation Lower position To prevent an accidental fall Daily Operations / Connections \ Others Rear panel Available signals Menu Configuration-MAIN Menu Safety Marker Menu Configuration-MAIN Menu Closed Caption Setting value OFF, CC1, CC2 Menu Configuration-SET-UP Menu Source ID, Wave FORM, C. C Wave form monitor display*7 Off Closed caption display Using the RS-232C system Troubleshooting Self-check program Maintenance DT-V9L3DY Dimensions Unit mm inch When the stand is attached toHigher position Lower position Page DT-V9L3DY Multi Format LCD Monitor

DT-V9L3D, DT-V9L3DY specifications

The JVC DT-V9L3D and DT-V9L3DY are high-performance broadcast-grade monitors designed for professional video production environments. With their advanced technologies and features, these monitors provide exceptional color accuracy, sharpness, and detail, making them an ideal choice for both studio and on-location setups.

One of the standout features of the DT-V9L3D and DT-V9L3DY is their 9-inch LCD display with a native resolution of 1920x1080 pixels. This high-definition display ensures that content creators can view their footage in stunning clarity. The monitors utilize IPS technology, which delivers wide viewing angles and consistent color reproduction across the screen. This is particularly beneficial for collaborative work in multi-user environments where multiple professionals need to view the same content simultaneously.

In terms of color accuracy, the JVC DT-V9L3D and DT-V9L3DY monitors excel with their ability to reproduce 100% of the sRGB color space. This level of precision is crucial for cinematographers and video editors who require accurate color representation for grading and correction tasks. Moreover, the monitors come equipped with various color calibration tools, allowing users to calibrate the display to match specific standards or preferences, ensuring consistent results across different viewing devices.

Both models are equipped with a variety of input options, including HDMI, SDI, and RGB connections. The DT-V9L3DY variant additionally supports 3G-SDI input, which is particularly useful for handling high-bandwidth video signals often required in professional broadcast settings. This versatility in connectivity makes these monitors suitable for different production workflows, whether in traditional studio environments or during mobile shoots.

Another notable characteristic is the built-in waveform monitor and vector scope functionality. These tools enable users to precisely analyze their video signals, making it easier to adjust exposure, color balance, and other key aspects of the footage in real time. This integrated functionality reduces the need for separate equipment and streamlines the workflow, making the JVC DT-V9L3D and DT-V9L3DY highly efficient solutions for video production.

In addition to their technical features, the design of the monitors is user-friendly, with intuitive controls and a compact form factor. Their lightweight design makes them easy to transport and mount in various setups. Overall, the JVC DT-V9L3D and DT-V9L3DY stand out as reliable, high-quality monitors that cater to the demands of professionals seeking exceptional performance and accuracy in their video production projects.
Top Page Image Contents