Onkyo S3200 instruction manual Listening to the Radio, AM/FM Frequency Step Setup

Listening to the Radio

AM/FM Frequency Step Setup

RECEIVER

4Use the Left and Right [e]/[r] buttons to select:

(North American/Taiwan models) 200k/10k:

Select if 200k/10k steps are used in your area.

50k/9k: Select if 50k/9k steps are used in your area.

ENTER

SETUP

qwer

(Asian models)

10kHz: Select if 10kHz steps are used in your area.

9kHz: Select if 9kHz steps are used in your area.

For AM/FM tuning to work properly, you must specify the AM/FM frequency step used in your area. Note that when this setting is changed, all radio presets are deleted.

1Press the [RECEIVER] button, followed by the [SETUP] button.

2Use the Up and Down [q]/[w] buttons to select “8.Hardware”, and then press [ENTER].

3Use the Up and Down [q]/[w] buttons to select “FM/AM” (North

American/Taiwan models) or “AM Freq” (Asian models).

(North American/Taiwan models)

(Asian models)

5Press the [SETUP] button.

Setup closes.

Note:

This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

42