Onkyo S3200 instruction manual Recording the Input Source, Recording from Different AV Sources

Page 46

Recording

This section explains how to record the input source and how to record audio and video from separate sources.

Notes:

The surround sound and DSP listening modes cannot be recorded.

Copy-protected DVDs cannot be recorded.

Sources connected to a digital input cannot be recorded. Only analog inputs can be recorded.

DTS signals will be recorded as noise, so don’t attempt analog recording of DTS CDs or LDs.

Recording the Input Source

Audio sources can be recorded to a recorder (e.g., cassette deck, CDR, MD) connected to the TV/TAPE OUT jack. Video sources can be recorded to a video recorder (e.g., VCR, DVR) connected to the VCR/DVR OUT jacks. See pages 21 to 34 for hookup information.

1Use the input selector buttons to select the source that you want to record.

You can watch the source while recording it. The AV receiver’s MASTER VOLUME control has no effect on recording.

2On your recorder, start recording.

3On the source component, start playback.

Note:

If you select a different input source during recording, that input source will be recorded instead.

Recording from Different AV Sources

You can overdub audio onto your video recordings by simultaneously recording audio and video from two separate sources. This is possible because only the audio source is switched when an audio-only input source, such as TV/TAPE or CD, is selected, the video source remains the same.

In the following example, audio from the CD player connected to the CD IN and video from the camcorder connected to the DVD/BD IN V jack are recorded by the VCR connected to the VCR/DVR OUT jacks.

Camcorder

video signal audio signal

CD player

VCR

1Prepare the camcorder and CD player for playback.

2Prepare the VCR for recording.

3Press the [DVD/BD] input selector button.

4Press the [CD] input selector button.

This selects the CD player as the audio source but leaves the camcorder as the video source.

5Start recording on the VCR, then start playback on the camcorder and CD player.

Video from the camcorder and audio from the CD player are recorded by the VCR.

46

Image 46
Contents HT-S3200 Important Safety Instructions AvisPreventing Hearing Loss Caution PrecautionsPower Batteries and Heat Exposure WarningUsing Close to a TV or Computer Speaker PrecautionsPlacement Input Signal WarningContents Package Contents Package Contents HT-R370 AV Receiver FeaturesHTP-370 Speaker Package Front & Rear Panels Front PanelFront & Rear Panels DisplayRear Panel VCR/DVR IN/OUT CBL/SATDVD/BD Speaker terminals Speaker PackageRear Keyhole slotsRemote Controller Controlling the AV receiverInstalling the Batteries Remote ControllerAiming the Remote Controller Speaker Sets a and B Enjoying Home TheaterSpeaker Set B Sub Room Speaker Set a Main Room Speaker Connection Precautions Connecting the AV receiverConnecting Your Speakers Connecting the Speaker CablesStrip 3/8 10 mm Connecting the AV receiverTerminals are gripping the bare wires, not InsulationUsing the Floor Pads for Subwoofer Using the Rubber Stoppers for a More Stable PlatformWall Mounting Connecting the AM Loop Antenna Connecting AntennaConnecting the Indoor FM Antenna Attach the FM antenna, as shown North American ModelConnecting an Outdoor AM Antenna Connecting an Outdoor FM AntennaUsing a TV/FM Antenna Splitter AV Connection Color Coding About AV ConnectionsOptical Digital Jacks AV Cables and JacksVideo Connection Formats Connecting Audio and Video Signals to the AV receiverWhich Connections Should I Use? Audio Connection FormatsAbout Copyright Protection Connecting Components with HdmiAbout Hdmi Pass-ThruStep Making Hdmi ConnectionsTip DVD/BD player StepAudio Connection Connecting a TV or ProjectorVideo Connection HintConnecting a DVD/BD player DVD/BD playerConnecting a VCR or DVR for Playback VCR or DVRConnecting a VCR or DVR for Recording Composite video inputSatellite, cable, set-top box, etc Portable Audio Player Connecting a Portable Audio playerMake the audio connection a Analog audio Line outputCD Player or Turntable MM with Built-in Phono Preamp Step Connecting a CD Player or TurntableTurntable MM with no Phono Preamp Built-in Connecting a Cassette, CDR, MiniDisc, or DAT Recorder Signal flow Cassette, CDR, MD, or DAT recorderIf Your iPod Supports Video Connecting an RI DockIf Your iPod Doesn’t Support Video Auto Power On/Standby Connecting Onkyo u ComponentsConnecting the Power Cord Direct ChangeTurning On and Standby Turning On the AV receiverUp and Running in a Few Easy Steps Digital Input Setup First Time SetupComponent Video Input Setup Press the Setup buttonFirst Time Setup Changing the Input DisplayBasic AV receiver Operation Select a listening mode and enjoyBasic Operations Start playback on the source componentBasic Operations Setting the Display BrightnessUsing the Sleep Timer Muting the AV receiverDisplaying Source Information 7Using HeadphonesAdjusting the Bass & Treble BassAuto default Using the Music OptimizerSpecifying the Digital Signal Format Press and hold Audio button for about 8 secondsListening to the Radio AM/FM Frequency Step SetupUse the Left and Right e/r buttons to select Listening to the Radio Tuning into AM/FM Radio StationsListening to AM/FM Stations D.TUN button Tuning into Stations by FrequencyDisplaying AM/FM Radio Information Band FrequencyDeleting Presets Presetting AM/FM StationsSelecting Presets Recording the Input Source Camcorder Video signal audio signal CD playerRecording Recording from Different AV SourcesSelecting the Listening Modes Using the Listening ModesSelecting with the Remote Controller Selecting on the AV receiverListening Modes Available for Each Source Format Using the Listening ModesMono/Multiplex Sources Stereo Source Multichannel Sources DTSAbout the Listening Modes Onkyo Original DSP ModesSpeaker Settings Advanced SetupCommon Procedures in Setup Menu Sp Config Speaker ConfigurationDouble Bass Advanced SetupCrossover Crossover Frequency Sp Distance Speaker DistanceLevel Cal Speaker Levels Calibration Equalizer Equalizer SettingsOff Tone off, No equalizing apply default Left, Center, Right, SurrRight, SurrLeft, SubwooferAudio Adjust Multiplex/Mono Settings Audio Adjust SettingsPLII/Neo6 Settings Audyssey Settings Hardware Remote ID Hardware SetupTheater-Dimensional Setting TunerLate Night Function Using the Audio SettingsTone Control Settings CinemaFILTERSpeaker Levels Audyssey Dynamic VolumeMusic Optimizer SyncSee page 61 for the Onkyo component’s remote control code Preprogrammed Remote Control CodesEntering Remote Control Codes Controlling Other ComponentsResetting the Remote Mode Buttons Resetting the Remote ControllerRemote Control Codes for Onkyo Components Connected via u Controlling Other ComponentsControlling a DVD Player, or DVD Recorder Controlling a CD Player, CD Recorder, or MD Player Controlling an RI Dock Rewind and Fast Forward 5/4 buttons Controlling a Cassette RecorderPrevious and Next 7/6 buttons Reverse Play t buttonTroubleshooting Troubleshooting Can’t record Sound changes when I connect my headphonesCan’t control other components How do I change the language of a multiplex sourceVideo Section SpecificationsAmplifier Section Tuner SectionSpecifications 1ch Home Theater Speaker PackageMemo Onkyo Europe Electronics GmbH Onkyo Europe UK OfficeSpeaker Set a Hookup RemoteAV Component Hookup ONKYOe Onkyo USA Corporation Limited Warranty USA Onkyo USA Corporation Limited Warranty Canada Garantie limitee de Onkyo USA Corporation Canada