Onkyo S3200 instruction manual Advanced Setup, Crossover Crossover Frequency, Double Bass

Page 53

Advanced Setup—Continued

Crossover (Crossover Frequency)

This setting only applies to the speakers that you specified as “Smallin the “3. Sp Config” on page 52.

To get the best bass performance from your speaker system, you need to set the crossover frequency according to the size and frequency response of your speakers.

Use the diameter of the smallest speaker in your system when choosing the crossover frequency.

Speaker cone diameter

Crossover frequency

 

 

Over 8 in. (20 cm)

40/50/60Hz*

 

 

6-1/2 to 8 in. (16–20 cm)

80Hz

 

 

5-1/4 to 6-1/2 in. (13–16 cm)

100Hz

 

 

3-1/2 to 5-1/4 in. (9–13 cm)

120Hz (default)

 

 

Under 3-1/2 in. (9 cm)

150/200Hz*

 

 

*Choose the setting suitable for the speaker.

Notes:

For a more accurate setting, look up the frequency response in the manuals supplied with your speakers and set accordingly.

Choose a higher crossover frequency if you want more sound from your subwoofer.

Double Bass

With the Double Bass function, you can boost bass output by feeding bass sounds from the front left, right, and center to the subwoofer. This function can be set only if the “Subwoofer” setting is set to “Yes”, and the “Front” setting is set to “Large” in the “3. Sp Config” on page 52.

On: Double Bass function on. Bass from the front left and right channels is also fed to the subwoofer (default).

Off: Double Bass function off.

4. Sp Distance (Speaker Distance)

With these settings, you can specify the distance from each speaker to the listening position. Measure and make a note of the distance from each speaker to the listening position.

Notes:

Speakers that you set to “No” or “None” in the “3. Sp Config” (page 52) cannot be selected.

The speaker distance setting cannot be changed while a pair of headphones is connected, or speaker set B is on.

The Center and Subwoofer distances can be set up to 5 ft. (1.5 m) more or less than the Left distance. For example, if the Left distance is set to 20 ft. (6 m), the Center and Subwoofer distances can be set between 15 and 25 ft. (4.5 and 7.5 m).

The Surround distances can be set up to 5 ft. (1.5 m) more or 15 ft. (4.5 m) less than the Left distance. For example, if the Left distance is set to 20 ft. (6 m), the SurrRight and SurrLeft distances can be set between 5 and 25 ft. (1.5 and 7.5 m).

Unit

feet:

Distances can be set in feet. Range: 1 to 30 feet in 1-foot steps.

 

meters:

Distances can be set in meters. Range: 0.3 to 9 meters in 0.3-meter steps.

Front, Center, SurrRight, SurrLeft, Subwoofer

Specify the distance from the each speaker to your listening position.

53

Image 53
Contents HT-S3200 Avis Important Safety InstructionsPower PrecautionsPreventing Hearing Loss Caution Batteries and Heat Exposure WarningPlacement Speaker PrecautionsUsing Close to a TV or Computer Input Signal WarningContents Package Contents Package Contents HTP-370 Speaker Package FeaturesHT-R370 AV Receiver Front Panel Front & Rear PanelsDisplay Front & Rear PanelsRear Panel DVD/BD CBL/SATVCR/DVR IN/OUT Rear Speaker PackageSpeaker terminals Keyhole slotsControlling the AV receiver Remote ControllerAiming the Remote Controller Remote ControllerInstalling the Batteries Speaker Set B Sub Room Speaker Set a Main Room Enjoying Home TheaterSpeaker Sets a and B Connecting Your Speakers Connecting the AV receiverSpeaker Connection Precautions Connecting the Speaker CablesTerminals are gripping the bare wires, not Connecting the AV receiverStrip 3/8 10 mm InsulationWall Mounting Using the Rubber Stoppers for a More Stable PlatformUsing the Floor Pads for Subwoofer Connecting the Indoor FM Antenna Connecting AntennaConnecting the AM Loop Antenna Attach the FM antenna, as shown North American ModelUsing a TV/FM Antenna Splitter Connecting an Outdoor FM AntennaConnecting an Outdoor AM Antenna Optical Digital Jacks About AV ConnectionsAV Connection Color Coding AV Cables and JacksWhich Connections Should I Use? Connecting Audio and Video Signals to the AV receiverVideo Connection Formats Audio Connection FormatsAbout Hdmi Connecting Components with HdmiAbout Copyright Protection Pass-ThruTip Making Hdmi ConnectionsStep DVD/BD player StepVideo Connection Connecting a TV or ProjectorAudio Connection HintDVD/BD player Connecting a DVD/BD playerVCR or DVR Connecting a VCR or DVR for PlaybackComposite video input Connecting a VCR or DVR for RecordingSatellite, cable, set-top box, etc Make the audio connection a Connecting a Portable Audio playerPortable Audio Player Analog audio Line outputTurntable MM with no Phono Preamp Built-in Connecting a CD Player or TurntableCD Player or Turntable MM with Built-in Phono Preamp Step Signal flow Cassette, CDR, MD, or DAT recorder Connecting a Cassette, CDR, MiniDisc, or DAT RecorderIf Your iPod Doesn’t Support Video Connecting an RI DockIf Your iPod Supports Video Connecting the Power Cord Connecting Onkyo u ComponentsAuto Power On/Standby Direct ChangeUp and Running in a Few Easy Steps Turning On the AV receiverTurning On and Standby Component Video Input Setup First Time SetupDigital Input Setup Press the Setup buttonChanging the Input Display First Time SetupBasic Operations Select a listening mode and enjoyBasic AV receiver Operation Start playback on the source componentUsing the Sleep Timer Setting the Display BrightnessBasic Operations Muting the AV receiverAdjusting the Bass & Treble 7Using HeadphonesDisplaying Source Information BassSpecifying the Digital Signal Format Using the Music OptimizerAuto default Press and hold Audio button for about 8 secondsUse the Left and Right e/r buttons to select AM/FM Frequency Step SetupListening to the Radio Listening to AM/FM Stations Tuning into AM/FM Radio StationsListening to the Radio Displaying AM/FM Radio Information Tuning into Stations by FrequencyD.TUN button Band FrequencySelecting Presets Presetting AM/FM StationsDeleting Presets Recording Camcorder Video signal audio signal CD playerRecording the Input Source Recording from Different AV SourcesSelecting with the Remote Controller Using the Listening ModesSelecting the Listening Modes Selecting on the AV receiverMono/Multiplex Sources Using the Listening ModesListening Modes Available for Each Source Format Stereo Source DTS Multichannel SourcesOnkyo Original DSP Modes About the Listening ModesCommon Procedures in Setup Menu Advanced SetupSpeaker Settings Sp Config Speaker ConfigurationCrossover Crossover Frequency Advanced SetupDouble Bass Sp Distance Speaker DistanceOff Tone off, No equalizing apply default Equalizer Equalizer SettingsLevel Cal Speaker Levels Calibration Left, Center, Right, SurrRight, SurrLeft, SubwooferPLII/Neo6 Settings Audio Adjust SettingsAudio Adjust Multiplex/Mono Settings Audyssey Settings Theater-Dimensional Setting Hardware SetupHardware Remote ID TunerTone Control Settings Using the Audio SettingsLate Night Function CinemaFILTERMusic Optimizer Audyssey Dynamic VolumeSpeaker Levels SyncEntering Remote Control Codes Preprogrammed Remote Control CodesSee page 61 for the Onkyo component’s remote control code Controlling Other ComponentsRemote Control Codes for Onkyo Components Connected via u Resetting the Remote ControllerResetting the Remote Mode Buttons Controlling Other ComponentsControlling a DVD Player, or DVD Recorder Controlling a CD Player, CD Recorder, or MD Player Controlling an RI Dock Previous and Next 7/6 buttons Controlling a Cassette RecorderRewind and Fast Forward 5/4 buttons Reverse Play t buttonTroubleshooting Troubleshooting Can’t control other components Sound changes when I connect my headphonesCan’t record How do I change the language of a multiplex sourceAmplifier Section SpecificationsVideo Section Tuner Section1ch Home Theater Speaker Package SpecificationsMemo Onkyo Europe UK Office Onkyo Europe Electronics GmbHRemote Speaker Set a HookupAV Component Hookup ONKYOe Onkyo USA Corporation Limited Warranty USA Onkyo USA Corporation Limited Warranty Canada Garantie limitee de Onkyo USA Corporation Canada