Onkyo S3200 instruction manual AV Component Hookup

AV Component Hookup See the other side of this sheel for the Speaker hookup. (]J

II you have an HDM1-<:ompatible TV and players, you can connect them

to the AV receiver with HOMI cables. Tl1e audio and video signal' received

via the HDMllnpulS are output by the HOMI OUT IS they are (pasS>lhrough). To listen through the speakers connected to ttle AV receiver, please make the audio connections shown below.

1111-'	AU;'	If your TV or player doesn'tsupport HOMI, use the analog or digital
		connections shown below.
	-
IF NO HDMI	VIDEO

Please ensure the monitor Input

(VIDEO 1, VIDEO 2, VIDEO 3, etc.)

selected corresponds to actual

connection used.

To fUlly enjoy the AV receiver'. listening modes, turn off the

volume on yourTV.

.." Coaxial feed from TV antenna

II you are not using Cable/salelllle bm:,

please refer to the Instruction manual.

.". CoaxIal feed from

	TV anlenna
	If yOl.l are nol using
	Cable/satellite boll,
	please refer to the
	instruction manual,
Assigning the Digital Input	On the Iront panel
II there'sno sound, YOU'llneed to assign tha	•
digital Inputs as necessary using tha setup
menus on the AV Receiver'sdisplay,
II you connect your OVO/BO player to the AV
receiver'sCOAXIAL OIGITAL IN, and your
cable/satellite receiver to the OPTICAL 1
DIGITAL tN, as shown, it'snot n.eceasary to
assign the digital input.