Onkyo DR-C500 instruction manual Basic Playback

Basic Playback

DVD VCD CD MP3

Stopping Playback

DVD VCD CD MP3

To Select a Disc

1 Remote controller

Unit

Press 7.

When you press £/8 on the unit or £ on the remote controller to restart playback, playback starts from the location where you stopped playback because the location index is stored in memory.

Notes

•The location where playback resumes may vary depending on the disc or the scene where you stopped.

•Resume playback is not available for MP3 discs.

Resuming playback from the beginning

Press 7 again after stopping playback to clear the location index memory, then press £/8 to start playback. Playback starts from the beginning of the disc.

Press one of the DISC 1 to DISC 5 buttons or press DISC SKIP repeatedly.

DVD VCD

Progressive Scan Function

1	Press PRGV to display Progressive
	or Interlaced icon on TV.
Remote controller
only
FM MODE
PRGV
2	Press PRGV again while displayed
	to switch between Progressive and
FM MODE	Interlaced.
PRGV

DVD VCD CD MP3

To Pause Playback (Still mode)

Remote	Press 8 on the remote controller or
controller	£/8on the unit during playback.
	To start playback press £ on the remote
	controller or £/8 on the unit.
Unit

Notes

•When component video is connected, you can use Progressive scan. Progressive scan is not available if S-Video or Composite video is connected.

•If you connect a TV that is not compatible with a progressive scan signal and choose “Progressive”, the picture may be distorted. Be sure to choose “Interlaced” if your TV is connected using either the Composite or S-Video terminals.

DVD VCD

When an operation is prohibited

There are times when you are using the DVD Changer Receiver and attempt to perform an operation, but for some reason it cannot be performed. When this occurs, appears on the screen.

34