Onkyo Complete Guide to HT-RC260 Speaker and Subwoofer Connections
Page 13

Note

•The front wide speakers can also be connected to the FRONT HIGH OR FRONT WIDE OR ZONE 2 SPEAKERS terminals. When doing so, set “Front High/Front Wide/Zone2” in Speaker Setup to “Front Wide” (➔ 36).

•The front high or front wide speakers can also be connected to the SURR BACK OR FRONT HIGH OR FRONT WIDE SPEAK- ERS terminals. When doing so, set “Surr Back/Front High/Front Wide” in Speaker Setup to “Front High” or “Front Wide” (➔ 36).

Connecting a Powered Subwoofer

Using a suitable cable, connect the AV receiver’s SUBWOOFER PRE OUT jack to an input on your powered subwoofer, as shown. If your sub- woofer is unpowered and you’re using an external amplifier, connect the SUBWOOFER PRE OUT jack to an input on the amp.

You can connect the powered subwoofer with two SUBWOOFER PRE OUT jacks respectively. The same signal is output from each jack.

Powered subwoofer

LINE INPUT

LINE INPUT

Bi-amping the Front Speakers

The FRONT L/R and SURR BACK OR FRONT

HIGH OR FRONT WIDE L/R terminal posts can be used with front speakers and surround back speakers respectively, or bi-amped to provide separate tweeter and woofer feeds for a pair of front speakers that sup- port bi-amping, providing improved bass and treble per- formance.

•When bi-amping is used, the AV receiver is able to drive up to a 5.1 speaker system in the main room.

•For bi-amping, the FRONT L/R terminal posts con- nect to the front speakers’ woofer terminals; the

SURR BACK OR FRONT HIGH OR FRONT WIDE L/R terminal posts connect to the front speak- ers’ tweeter terminals.

•Once you’ve completed the bi-amping connections shown below and turned on the AV receiver, you must set the “Speakers Type” setting to “Bi-Amp” to enable bi-amping (➔ 35).

Important:

RightLeft

speaker speaker

Tweeter (high)

Woofer (low)

•When making the bi-amping connections, be sure to remove the jumper bars that link the speakers’ tweeter (high) and woofer (low) terminals.

•Bi-amping can be used only with speakers that support bi-amping. Refer to your speaker manual.

En

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents HT-RC260 10 cm 4 at the rear. The rear edge of the shelf or Always consider the environmental issues and followBoard above the apparatus shall be set 10 cm Away from the rear panel or wall, creating a flue-likePrecautions Using the Remote Controller Supplied AccessoriesInstalling the Batteries Aiming the Remote ControllerContents Amplifier FeaturesProcessing MiscellaneousTUNING, Preset 25 to 26, arrow Hdmi Thru indicatorFront & Rear Panels Front PanelDisplay UREMOTE Control jackRear Panel CENTER, FRONT, SURR, Surr Back or Front High or Front WideControlling the AV Receiver Remote ControllerReturn button Controlling the tunerEnjoying Home Theater About Home TheaterConnecting Your Speakers Connecting the AV ReceiverSpeaker Configuration Speaker Connection PrecautionsSpeaker cables, and twist the bare wires tightly, as shown Connecting the Speaker CablesScrew-type speaker terminals Strip 1/2 to 5/8 12 to 15 mm Bi-amping the Front Speakers Connecting a Powered SubwooferConnected image with AV components About AV ConnectionsAV Cables and Jacks Hdmi cableJack Signal Components Assignable Connecting Components with HdmiAudio return channel ARC function How to record the video Connecting External ComponentsFront RearConnecting Antenna Connecting Onkyo uComponentsSystem On/Auto Power On Remote ControlWhich Connections Should I Use? Signal SelectionVideo Connection Formats Audio Connection FormatsTurning On Turning On/Off the AV ReceiverTurning Off Setting the Display Brightness Selecting the Language Used for the Onscreen Setup MenusBasic Operations Playing the Connected ComponentUsing the Audio and Video Menus Using the Sleep TimerMuting the AV Receiver Selecting Speaker LayoutAudyssey 2EQ Room Correction and Speaker Setup Using HeadphonesChanging the Input Display Measurement time varies depending on the number of speakersEnter Using Audyssey 2EQChanging the Speaker Settings Manually Error MessagesUsing a Powered Subwoofer Tuning into Radio Stations Using the TunerListening to the Radio Listening to the RadioSelecting Presets Presetting FM/AM StationsDeleting Presets ModeAV Recording RecordingThat you want to record On your recorder, start recordingListening Mode Buttons Using the Listening ModesSelecting Listening Modes MOVIE/TV button Game buttonExplanatory Notes About Listening ModesInput Source Speaker LayoutListening Modes Dolby Digital Plus *5 Resolution AudioDolby TrueHD DTS-HD HighUnplugged Onkyo-Original DSP Listening ModesOn-screen Setup Menus Advanced SetupCommon Procedures in Setup Menu MenuMonitor Out Input/Output AssignHdmi Input BD/DVD, VCR/DVR, CBL/SAT, GAME, TV/CD PortSpeaker Settings Speaker SetupComponent Video Input Digital Audio InputSurrBack/Front High/Front Wide Speaker Terminal Assign Front High/Front Wide/Zone2Front Center*1, Surround*1, Surr Back*2*3*4*5Equalizer Settings Audio AdjustSpeaker Distance Level CalibrationAudyssey DSX DolbyTheater-Dimensional Source SetupAudyssey Sync IntelliVolumeName Edit Game Mode Picture AdjustTo correct a character Wide Mode*1*2Film Mode*2 Picture Mode*1*2Edge Enhancement*2 Noise Reduction*2Volume Setup Listening Mode PresetOSD Setup MiscellaneousRemote ID Hardware SetupTuner Using the Audio Settings Lock SetupTone Control Settings Speaker Levels Audyssey SettingsLate Night Music OptimizerSetting the Incoming Digital Signal Fixed Mode Adjusting the Bass & TrebleBass Treble Connecting Your Zone 2 Speakers Directly to the AV receiver Connecting ZoneConnecting Your Zone 2 Speakers to an Amp in Zone ZoneControlling Zone 2 from the AV receiver Setting the Powered Zone Using ZoneAdjusting the Volume for Zone Controlling Zone 2 with the Remote ControllerOperating with the remote controller Muting ZoneControlling iPod Connecting an Onkyo DockModels sold are different depending on the region Onkyo Dock CableUP-A1 Dock Using the Onkyo DockRI Dock Controlling Your iPodWithout the RI Control With the RI ControlAvailable buttons Looking up for Remote Control Code Preprogrammed Remote Control CodesControlling Other Components Remote Control Codes for Onkyo Components Connected via u Entering Remote Control CodesRemote Mode BD/DVD TV/CDResetting the Remote Controller Resetting Remote Mode ButtonsYou can reset the remote controller to its default settings Controlling Other ComponentsComponents Buttons SetupCassettetape deck ON/STANDBY Input TV VOL q / w GuideStandby indicator flashes red TroubleshootingCan’t turn on the AV receiver There’s no sound, or it’s very quietAbout DTS signals There’s no sound with a certain signal formatOnly the front speakers produce sound Only the center speaker produces soundThere’s no picture from a source connected to an Hdmi Remote controller doesn’t workOn-screen menus don’t appear On screen display does not appearSound changes when I connect my headphones AV receiver’s remote controller doesn’t control your iPodCan’t record Zone 2 speakers produce no soundNent Video OUT Important Note Regarding Video PlaybackAmplifier Section General SpecificationsVideo Section Tuner SectionSupported Audio Formats About HdmiAbout Copyright Protection About p-compatible components Using an RIHD-compatible TV, Player, or RecorderOperations that can be performed with p connection Confirm the connecting and setting How to connect and setupChange each item in the Hdmi Setup as below Confirm the settingsOutput Video Resolution ChartInput Output 1080p 1080i 720p 480p 480iMemo Memo Memo Onkyo Europe Electronics GmbH UK Branch Onkyo Europe Electronics GmbH

HT-RC260 specifications

The Onkyo HT-RC260 is a versatile and powerful home theater receiver designed to enhance your audio-visual experience. While it may not be the latest model on the market, its combination of features and technologies makes it an excellent choice for those looking to create a rich and immersive entertainment environment.

One of the standout features of the HT-RC260 is its robust amplification system. This receiver provides 7.2 channels of surround sound, delivering up to 100 watts per channel. This level of power ensures that your home theater can fill a room with dynamic sound, making every movie, music track, or game come to life. The receiver also supports various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, allowing for a cinematic experience at home.

Connectivity options abound with the HT-RC260. It includes multiple HDMI inputs, accommodating various devices such as Blu-ray players, game consoles, and streaming devices. The HDMI ports support 3D video and 4K passthrough, ensuring compatibility with the latest video technologies. Additionally, the receiver features analog and digital audio inputs, allowing you to connect legacy devices with ease.

The Onkyo HT-RC260 also integrates advanced calibration technology known as AccuEQ. This feature automatically measures the characteristics of your room and adjusts the audio output for optimal sound quality. As a result, users can enjoy consistent audio experiences regardless of room size or shape.

For those who value convenience, the HT-RC260 supports network streaming services. Users can access popular platforms like Spotify, Pandora, and TuneIn via built-in Wi-Fi. Additionally, the receiver can connect to home networks via Ethernet, expanding your listening options and making it easy to enjoy your favorite music.

The user interface is straightforward, with an intuitive on-screen display that simplifies setup and operation. The included remote control allows easy access to all functions, making it user-friendly even for those who may not be tech-savvy.

In summary, the Onkyo HT-RC260 is an excellent choice for home theater enthusiasts. With its powerful amplification, diverse connectivity, advanced audio calibration, and network streaming capabilities, it offers a well-rounded solution for anyone seeking to elevate their audiovisual experience. Whether you are watching films, playing video games, or listening to music, the HT-RC260 provides an engaging and harmonious soundstage that will enhance your enjoyment for years to come.
Top Page Image Contents