Onkyo HT-RC260 instruction manual About Hdmi, Supported Audio Formats, About Copyright Protection

Page 65

About HDMI

Designed to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface standard for connecting TVs, projectors, Blu-ray Disc/DVD players, set-top boxes, and other video compo- nents. Until now, several separate video and audio cables have been required to connect AV components. With HDMI, a single cable can carry control signals, digital video, and up to eight channels of digital audio (2-channel PCM, multichan- nel digital audio, and multichannel PCM).

The HDMI video stream (i.e., video signal) is compatible with DVI (Digital Visual Interface)*1, so TVs and displays with a DVI input can be connected by using an HDMI-to-DVI adapter cable. (This may not work with some TVs and displays, resulting in no picture.)

The AV receiver uses HDCP (High-bandwidth Digital Content Protection)*2, so only HDCP-compatible components can display the picture.

The AV receiver’s HDMI interface is based on the following:

Audio Return Channel, 3D, x.v.Color, Deep Color, Lip Sync, DTS-HD Master Audio, DTS-HD High Resolution Audio, Dolby TrueHD, Dolby Digital Plus, DSD and Multichannel PCM

Supported Audio Formats

•2-channel linear PCM (32–192 kHz, 16/20/24 bit)

•Multichannel linear PCM (up to 7.1 ch, 32–192 kHz, 16/20/24 bit)

•Bitstream (DSD, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD High Resolution Audio, DTS-HD Master Audio)

Your Blu-ray Disc/DVD player must also support HDMI output of the above audio formats.

About Copyright Protection

The AV receiver supports HDCP (High-bandwidth Digital Content Protection)*2, a copy-protection system for digital video signals. Other devices connected to the AV receiver via HDMI must also support HDCP.

*1 DVI (Digital Visual Interface): The digital display interface standard set by the DDWG*3 in 1999.

*2 HDCP (High-bandwidth Digital Content Protection): The video encryption technology developed by Intel for HDMI/DVI. It’s designed to protect video content and requires a HDCP-compatible device to display the encrypted video.

*3 DDWG (Digital Display Working Group): Lead by Intel, Compaq, Fujitsu, Hewlett Packard, IBM, NEC, and Silicon Image, this open industry group’s objective is to address the industry’s requirements for a digital connectivity specification for high-performance PCs and digital displays.

Note

•The HDMI video stream is compatible with DVI (Digital Visual Interface), so TVs and displays with a DVI input can be connected by using an HDMI-to-DVI adapter cable. (Note that DVI connections only carry video, so you’ll need to make a separate connection for audio.) However, reliable operation with such an adapter is not guaranteed. In addition, video signals from a PC are not supported.

•The HDMI audio signal (sampling rate, bit length, etc.) may be restricted by the connected source component. If the picture is poor or there’s no sound from a component connected via HDMI, check its setup. Refer to the connected component’s instruction manual for details.

En

65

Page 64 Page 66
Image 65
Page 64 Page 66
Contents HT-RC260 10 cm 4 at the rear. The rear edge of the shelf or Always consider the environmental issues and followBoard above the apparatus shall be set 10 cm Away from the rear panel or wall, creating a flue-likePrecautions Using the Remote Controller Supplied AccessoriesInstalling the Batteries Aiming the Remote ControllerContents Amplifier FeaturesProcessing MiscellaneousTUNING, Preset 25 to 26, arrow Hdmi Thru indicatorFront & Rear Panels Front PanelDisplay UREMOTE Control jackRear Panel CENTER, FRONT, SURR, Surr Back or Front High or Front WideControlling the AV Receiver Remote ControllerReturn button Controlling the tunerEnjoying Home Theater About Home TheaterConnecting Your Speakers Connecting the AV ReceiverSpeaker Configuration Speaker Connection PrecautionsScrew-type speaker terminals Strip 1/2 to 5/8 12 to 15 mm Connecting the Speaker CablesSpeaker cables, and twist the bare wires tightly, as shown Bi-amping the Front Speakers Connecting a Powered SubwooferConnected image with AV components About AV ConnectionsAV Cables and Jacks Hdmi cableAudio return channel ARC function Connecting Components with HdmiJack Signal Components Assignable How to record the video Connecting External ComponentsFront RearConnecting Antenna Connecting Onkyo uComponentsSystem On/Auto Power On Remote ControlWhich Connections Should I Use? Signal SelectionVideo Connection Formats Audio Connection FormatsTurning Off Turning On/Off the AV ReceiverTurning On Setting the Display Brightness Selecting the Language Used for the Onscreen Setup MenusBasic Operations Playing the Connected ComponentUsing the Audio and Video Menus Using the Sleep TimerMuting the AV Receiver Selecting Speaker LayoutAudyssey 2EQ Room Correction and Speaker Setup Using HeadphonesChanging the Input Display Measurement time varies depending on the number of speakersEnter Using Audyssey 2EQUsing a Powered Subwoofer Error MessagesChanging the Speaker Settings Manually Tuning into Radio Stations Using the TunerListening to the Radio Listening to the RadioSelecting Presets Presetting FM/AM StationsDeleting Presets ModeAV Recording RecordingThat you want to record On your recorder, start recordingListening Mode Buttons Using the Listening ModesSelecting Listening Modes MOVIE/TV button Game buttonExplanatory Notes About Listening ModesInput Source Speaker LayoutListening Modes Dolby Digital Plus *5 Resolution AudioDolby TrueHD DTS-HD HighUnplugged Onkyo-Original DSP Listening ModesOn-screen Setup Menus Advanced SetupCommon Procedures in Setup Menu MenuMonitor Out Input/Output AssignHdmi Input BD/DVD, VCR/DVR, CBL/SAT, GAME, TV/CD PortSpeaker Settings Speaker SetupComponent Video Input Digital Audio InputSurrBack/Front High/Front Wide Speaker Terminal Assign Front High/Front Wide/Zone2Front Center*1, Surround*1, Surr Back*2*3*4*5Equalizer Settings Audio AdjustSpeaker Distance Level CalibrationAudyssey DSX DolbyAudyssey Source SetupTheater-Dimensional Name Edit IntelliVolumeSync Game Mode Picture AdjustTo correct a character Wide Mode*1*2Film Mode*2 Picture Mode*1*2Edge Enhancement*2 Noise Reduction*2Volume Setup Listening Mode PresetOSD Setup MiscellaneousTuner Hardware SetupRemote ID Tone Control Settings Lock SetupUsing the Audio Settings Speaker Levels Audyssey SettingsLate Night Music OptimizerBass Treble Adjusting the Bass & TrebleSetting the Incoming Digital Signal Fixed Mode Connecting Your Zone 2 Speakers Directly to the AV receiver Connecting ZoneConnecting Your Zone 2 Speakers to an Amp in Zone ZoneControlling Zone 2 from the AV receiver Setting the Powered Zone Using ZoneAdjusting the Volume for Zone Controlling Zone 2 with the Remote ControllerOperating with the remote controller Muting ZoneControlling iPod Connecting an Onkyo DockModels sold are different depending on the region Onkyo Dock CableUP-A1 Dock Using the Onkyo DockRI Dock Controlling Your iPodWithout the RI Control With the RI ControlAvailable buttons Controlling Other Components Preprogrammed Remote Control CodesLooking up for Remote Control Code Remote Control Codes for Onkyo Components Connected via u Entering Remote Control CodesRemote Mode BD/DVD TV/CDResetting the Remote Controller Resetting Remote Mode ButtonsYou can reset the remote controller to its default settings Controlling Other ComponentsComponents Buttons SetupCassettetape deck ON/STANDBY Input TV VOL q / w GuideStandby indicator flashes red TroubleshootingCan’t turn on the AV receiver There’s no sound, or it’s very quietAbout DTS signals There’s no sound with a certain signal formatOnly the front speakers produce sound Only the center speaker produces soundThere’s no picture from a source connected to an Hdmi Remote controller doesn’t workOn-screen menus don’t appear On screen display does not appearSound changes when I connect my headphones AV receiver’s remote controller doesn’t control your iPodCan’t record Zone 2 speakers produce no soundNent Video OUT Important Note Regarding Video PlaybackAmplifier Section General SpecificationsVideo Section Tuner SectionAbout Copyright Protection About HdmiSupported Audio Formats Operations that can be performed with p connection Using an RIHD-compatible TV, Player, or RecorderAbout p-compatible components Confirm the connecting and setting How to connect and setupChange each item in the Hdmi Setup as below Confirm the settingsOutput Video Resolution ChartInput Output 1080p 1080i 720p 480p 480iMemo Memo Memo Onkyo Europe Electronics GmbH UK Branch Onkyo Europe Electronics GmbH

HT-RC260 specifications

The Onkyo HT-RC260 is a versatile and powerful home theater receiver designed to enhance your audio-visual experience. While it may not be the latest model on the market, its combination of features and technologies makes it an excellent choice for those looking to create a rich and immersive entertainment environment.

One of the standout features of the HT-RC260 is its robust amplification system. This receiver provides 7.2 channels of surround sound, delivering up to 100 watts per channel. This level of power ensures that your home theater can fill a room with dynamic sound, making every movie, music track, or game come to life. The receiver also supports various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, allowing for a cinematic experience at home.

Connectivity options abound with the HT-RC260. It includes multiple HDMI inputs, accommodating various devices such as Blu-ray players, game consoles, and streaming devices. The HDMI ports support 3D video and 4K passthrough, ensuring compatibility with the latest video technologies. Additionally, the receiver features analog and digital audio inputs, allowing you to connect legacy devices with ease.

The Onkyo HT-RC260 also integrates advanced calibration technology known as AccuEQ. This feature automatically measures the characteristics of your room and adjusts the audio output for optimal sound quality. As a result, users can enjoy consistent audio experiences regardless of room size or shape.

For those who value convenience, the HT-RC260 supports network streaming services. Users can access popular platforms like Spotify, Pandora, and TuneIn via built-in Wi-Fi. Additionally, the receiver can connect to home networks via Ethernet, expanding your listening options and making it easy to enjoy your favorite music.

The user interface is straightforward, with an intuitive on-screen display that simplifies setup and operation. The included remote control allows easy access to all functions, making it user-friendly even for those who may not be tech-savvy.

In summary, the Onkyo HT-RC260 is an excellent choice for home theater enthusiasts. With its powerful amplification, diverse connectivity, advanced audio calibration, and network streaming capabilities, it offers a well-rounded solution for anyone seeking to elevate their audiovisual experience. Whether you are watching films, playing video games, or listening to music, the HT-RC260 provides an engaging and harmonious soundstage that will enhance your enjoyment for years to come.
Top Page Image Contents