Onkyo HT-RC260 Picture Mode*1*2, Film Mode*2, Edge Enhancement*2, Noise Reduction*2, Contrast*1*2

`Zoom:

`Wide Zoom:

`Auto:

According to the input signals and monitor output setting, the AV receiver automatically selects the “4 : 3”, “Full”, “Zoom” or “Wide Zoom” mode. For the monitor output setting (➔ 34).

■Picture Mode*1*2

`Thru:

The following settings are set to the default values: “Film Mode”, “Edge Enhancement”, “Noise Reduction”, “Brightness”, “Contrast”, “Hue” and “Saturation”

`Custom:

You can set the following settings as you like: “Film Mode”, “Edge Enhancement”, “Noise Reduction”, “Brightness”, “Contrast”, “Hue” and “Saturation”

`Cinema:

Selected when the picture source is movie film, etc.

`Game:

Select to use in connecting a game console.

With Picture Mode, you can change the following settings to be suitable for the movie or game screen by one opera- tion; “Film Mode”, “Edge Enhancement”, “Noise

Reduction”, “Brightness”, “Contrast”, “Hue” or “Satu- ration”.

En

■Film Mode*2

`Video:

Does not process in either “3 : 2” or “2 : 2”.

`Auto:

Adjusts to the picture source, automatically selecting “Picture Mode”.

`3 : 2:

Selected when the picture source is movie film, etc.

`2 : 2:

Selected when the picture source is computer graph- ics, animation, etc.

The AV receiver will adjust to the picture source, process- ing in either “3 : 2” or “2 : 2” (Film Mode). It automati- cally converts the source to the appropriate progressive signal and reproduces the natural quality of the original picture.

When the “Film Mode” setting is set to “Auto”, the AV receiver automatically detects the picture source and in either “3 : 2” or “2 : 2”. However, there may be times when you will get a better picture by setting “Film Mode” yourself.

Note

•If the “Game Mode” setting is set to “On” (➔ 41), this setting is fixed at “Video”.

■Edge Enhancement*2

`0 to +10

With this setting you can adjust the sharpness of edges in the picture. “0” is the softest. “+10” is the sharpest.

■Noise Reduction*2

`Off:

Noise reduction off.

`Low:

Low noise reduction.

`Mid:

Medium noise reduction.

`High:

High noise reduction.

With this setting, you can reduce noise appearing on the screen.

Note

•If the “Game Mode” setting is set to “On” (➔ 41), this setting is fixed at “Off”.

■Brightness*1*2

`–50 to 0 to +50

With this setting you can adjust the picture bright- ness. “–50” is the darkest. “+50” is the brightest.

■Contrast*1*2

`–50 to 0 to +50

With this setting you can adjust contrast. “–50” is the least. “+50” is the greatest.

■Hue*1*2

`–20 to 0 to +20

With this setting you can adjust the red/green bal- ance. “–20” is the strongest green. “+20” is the strongest red.

42