Onkyo HT-RC260 Advanced Setup, On-screen Setup Menus, Common Procedures in Setup Menu

Advanced Setup

On-screen Setup Menus

The on-screen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is con- nected to the composite video MONITOR OUT or the COMPONENT VIDEO OUT, use the AV receiver’s display when changing settings.

This manual describes the procedure using the remote controller unless otherwise specified.

MENU

a1. Input/Output Assign b 2. Speaker Setup

c 3. Audio Adjust d 4. Source Setup

e 5. Listening Mode Preset f 6. Miscellaneous

g 7. Hardware Setup

h 8. Remote Controller Setup i 9. Lock Setup

aInput/Output Assign f Miscellaneous (➔ 43) (➔ 34)

6.Miscellaneous

1. Input/Output Assign	1.	Volume Setup
	2.	OSD Setup

1.Monitor Out

2.HDMI Input

3.Component Video Input

4.Digital Audio Input

bSpeaker Setup (➔ 35) g Hardware Setup (➔ 44)

2.Speaker Setup

1.	Speaker Settings		7. Hardware Setup
2.	Speaker Configuration
3.	Speaker Distance	1.	Remote ID
4.	Level Calibration	2.	Tuner
5.	Equalizer Settings	3.	HDMI

c Audio Adjust (➔ 37)		h Remote Controller
			Setup (➔ 55)
	3. Audio Adjust
1.	Multiplex/Mono		8. Remote Controller Setup
2.	Dolby	1. Remote Mode Setup
3.	DTS

4.Audyssey DSX

5.Theater-Dimensional

d Source Setup (➔ 39)	i Lock Setup (➔ 45)
4. Source Setup	9.	Lock Setup
1. Audyssey	Lock

2.IntelliVolume

3.A/V Sync

4.Name Edit

5.Picture Adjust

eListening Mode Preset (➔ 43)

5.Listening Mode Preset

1.BD/DVD

2.VCR/DVR

3.CBL/SAT

4.GAME

5.AUX

6.TUNER

7.TV/CD

8.PORT

Common Procedures in Setup Menu

Remote indicator

	RECEIVER
ENTER
q/w/e/r
SETUP	RETURN

The on-screen setup menus appear on the connected TV and provide a convenient way to change the AV receiver’s various settings. Settings are organized into nine catego- ries on the main menu.

Carry out the settings by using the on-screen display.

1 Press RECEIVER followed by SETUP. The following menu appears.

MENU

1. Input/Output Assign

2. Speaker Setup

3. Audio Adjust

4. Source Setup

5. Listening Mode Preset

6. Miscellaneous

7. Hardware Setup

8. Remote Controller Setup

9. Lock Setup

Tip

• If the main menu doesn’t appear, make sure the appropri- ate external input is selected on your TV.

2 Use q/wto select a menu, and then press ENTER.

3 Use q/wto select target, and then press ENTER.

4 Use q/wto select option and e/rto change the setting.

Press SETUP to close the menu.

Press RETURN to return to the main menu.

Note

•This procedure can also be performed on the AV receiver by using SETUP, arrow buttons, and ENTER.

•During Audyssey 2EQ® Room Correction and Speaker Setup, messages, etc., that are displayed on the TV screen will appear in the Display.

En

33