Sharp Projector Remote Control setup guide On VCR. U-Matic or Laserdisc Console #2, Clean up

Page 29

To temporarily turn projector off, press MUTE on the remote. Projector will turn itself back automatically in 10 minutes, or when you press MUTE again.

6.0On VCR. U-Matic or Laserdisc (Console #2)

6.1Power ON to VCR1 (VHS VCR), VCR2 (U-Matic) or LDP1 (Laserdisc).

6.2Insert and start playing video or disc.

7.0Clean up

7.1Power OFF to Projectors.

7.2Remove video or disc from player.

7.3Power OFF to PRIMARY CONTROL.

Image 29

Contents Audio/visual equipment setup guide Table of Contents On Primary Control Console #1 Clean upOn Receiver Console #1 On Tape Deck Console #1Initial setup Setting Up and Displaying Laptop Computers RoomOn Switcher Console #1 see Image below and Figure Bl PR0J2 CPU button is for the projector nearest the windows Power OFF to Primary Control On SwitcherUsing the Mitsubishi Portable Projector Cheat Sheet Page Room 111- Cheat Sheet On Switcher Room 111- Step-by-Step Wall Jacks on south wall Macintosh Switcher Page On Switcher Projector Remote Control Should be one in classroom Only one projector can be chosen to display video images On VCR, U-Matic or Laserdisc Console #2 Using the P.A. System in Room 1 1 1 Cheat Sheet Using The Sharp Portable Projector- Cheat Sheet Page Using Video Output in Room 111 Cheat Sheet On VCR, U-Matic or Laserdisc Console #2 On Switcher Console #1 /see Image below and Figure Al Using Video Output in Room 111 Step-by-StepFigure a On Switcher On VCR. U-Matic or Laserdisc Console #2