Sharp Projector Remote Control On Primary Control Console #1, On Receiver Console #1, Clean up

Page 3

Using the Cassette Player in Room 1 1 1 - Cheat

Sheet

Brief instructions on using the stationary cassette player in room 111

1.0On PRIMARY CONTROL (Console #1)

1.1Select Power ON (button lit).

1.2Select Ceiling speakers ON (button lit).

2.0On RECEIVER (Console #1)

2.1RECEIVER should be ON (text is shown in display window).

2.2Select TAPE DECK button (displayed text: TAPE).

Please Note: The volume knob on the PRIMARY CONTROL is for the ceiling speakers. The volume knob on the RECEIVER is for the speakers on either side of the whiteboard.

3.0On TAPE DECK (Console #1)

3.1TAPE DECK should be ON (lights are on)

3.2Insert and play tape.

4.0Clean up

4.1Remove cassette from TAPE DECK.

4.2Power OFF to PRIMARY CONTROL.

Image 3

Contents Audio/visual equipment setup guide Table of Contents On Tape Deck Console #1 Clean upOn Primary Control Console #1 On Receiver Console #1Initial setup Setting Up and Displaying Laptop Computers RoomOn Switcher Console #1 see Image below and Figure Bl PR0J2 CPU button is for the projector nearest the windows Power OFF to Primary Control On SwitcherUsing the Mitsubishi Portable Projector Cheat Sheet Page Room 111- Cheat Sheet On Switcher Room 111- Step-by-Step Wall Jacks on south wall Macintosh Switcher Page On Switcher Projector Remote Control Should be one in classroom Only one projector can be chosen to display video images On VCR, U-Matic or Laserdisc Console #2 Using the P.A. System in Room 1 1 1 Cheat Sheet Using The Sharp Portable Projector- Cheat Sheet Page Using Video Output in Room 111 Cheat Sheet On VCR, U-Matic or Laserdisc Console #2 On Switcher Console #1 /see Image below and Figure Al Using Video Output in Room 111 Step-by-StepFigure a On Switcher On VCR. U-Matic or Laserdisc Console #2