Sharp PGB10S Picture Adjustment, Adjusting the Image, CLR Temp Adjusting Color Temperature

Picture Adjustment

You can adjust the projector’s picture to your preferences using the “Picture” menu.

Adjusting the Image

Select the item on the “Picture” menu and adjust the image.

Adjusting the menu screen Page 32

Example: “Picture” screen menu for INPUT 1 (RGB) mode

Description of Adjustment Items

Selectable items	Press \	Press
Contrast	for less contrast.	for more contrast.
Bright	for less brightness.	for more brightness.
Color	for less color intensity.	for more color intensity.
Tint	for making skin tones purplish.	for making skin tones greenish.
Sharp	for less sharpness.	for more sharpness.
Red	for weaker red.	for stronger red.
Blue	for weaker blue.	for stronger blue.

CLR Temp (Adjusting the

Color Temperature)

Select “CLR Temp” on the “Picture” menu and the desired color temperature setting.

Setting the menu screen Page 34

Example: “Picture” screen menu for INPUT 1 (RGB) mode

Description of Color Temperature Settings

Selectable settings	Description
5500K	For lower color temperature for warmer,
6500K	reddish incandescent-like images.
7500K
8500K
9300K	For higher color temperature for cooler, blu-
10500K	ish, fluorescent-like images.

Note

•“Color”, “Tint” and “Sharp” are not displayed when selecting INPUT 1 and setting the “Sig- nal Type” to “RGB” or setting the “Signal Type” to “Auto” and the input signal is recognized as an RGB signal.

•“Red” and “Blue” cannot be adjusted when “sRGB” is set to “ON”.

•“Sharp” can be adjusted when 480I, 480P, 540P, 580I, 580P, 720P, 1035I or 1080I signals are detected while “Signal Type” for INPUT 1 is set to “Component” or set to “Auto” and the input signal is recognized as a component signal.

•To reset all adjustment items, select “Reset” and

press .

Note

•Values for “CLR Temp” are only approximations.

•“CLR Temp” cannot be set when “sRGB” is set to “ON”.

-36