Sharp PGB10S operation manual Connecting to Component Video Equipment, Cable

Connecting to Component Video Equipment

Use a 3 RCA to 15-pin D-sub cable when con- necting to the INPUT 1 terminal, component video equipment such as DVD players and DTV* decoders.

*DTV is the umbrella term used to describe the new digital television system in the United States.

1Connect the projector to the video equipment using the 3 RCA to 15-pin D-sub cable.

•Secure the connectors by tightening the thumbscrews.

2Connect the projector to the video equipment using a ø3.5 mm minijack to RCA audio cable (commercially available).

Note

•If the projector does not automatically de- tect a COMPONENT signal, the projected image will appear distorted. To correct, change the menu setting from “Auto” to “Component”. The menu setting can be found in the “Picture” menu. See page 38.

•A ø3.5 mm minijack to RCA audio cable (commercially available) is required for au- dio input.

Optional	3RCA to 15-pin D-sub cable
	AN-C3CP
cable
	(9'10" (3.0 m))

To analog component output terminal

To audio output terminal

DVD player or

DTV* decoder

13 RCA to 15-pin D-sub cable (sold separately)

2ø3.5 mm minijack to RCA audio cable (commercially available)

Connections

-53