5/4 
GT
ROUNDING SELECTOR:
Example: Set decimal selector to “2”.
4 ⎟ 9 = 0.444 ... , 5 ⎟ 9 = 0.555 ...
4 | 9 | 5 | 9 |
| 0.45 |
| 0.56 |
5/4 | 0.44 |
| 0.56 |
| 0.44 |
| 0.55 |
Note: The decimal point floats during successive calculation by the use of 
or 
.
If the decimal selector is set to “F” then the answer is always rounded down (
).
CONSTANT / ADD MODE SELECTOR:
“K” : The following constant functions will be performed:
Multiplication: The calculator will automatically remember the first
|
| number entered (the multiplicand) and | instruction. | ||||
Division: | The calculator will automatically remember the second | ||||||
“•”: | Neutral | number entered (the divisor) and |
| instruction. | |||
| |||||||
|
|
|
|
|
| ||
“A”: | Use of the Add mode permits addition and subtraction of numbers | ||||||
| without entry of the decimal point. When the Add mode is activated, | ||||||
| the decimal point is automatically positioned according to the deci- | ||||||
| mal selector setting. |
|
|
|
|
| |
| Use of | , , and |
| will automatically override the Add mode and | |||
|
| ||||||
decimally correct answers will be printed at the preset decimal position.
GRAND TOTAL MODE SELECTOR:
“GT”: This selector will accumulate the following: (“ ✱ +” will be printed.)
1.Addition and subtraction totals obtained with 
.
2.Product and quotient totals obtained with 
or 
.
3.Answers obtained with 
or 
.
Neutral
PAPER FEED KEY
LAST DIGIT CORRECTION KEY
GRAND TOTAL KEY:
Prints and clears the “GT” memory contents.
– 4 –