Sharp MX-2300G manual Open the paper settings screen, Touch the paper type key of the bypass tray

	Full Colour	Auto	Auto	A4		2-Sided Copy
	Colour Mode
		Original	Paper Select
	Job Detail					Output
					Plain
	Settings
			Special Modes		A4
4						Special Modes
	Auto
	Exposure					File
	100%
						Quick File
	Copy Ratio
		(1)			(2)

Open the paper settings screen.

(1)Touch the [Job Detail Settings] key.

(2)Touch the [Paper Select] key.

	Paper Select		OK
	A4	Plain	A4
5	A4R	Plain	Plain
	B4	Plain
	A3	Plain

Touch the paper type key of the bypass tray.

(A)Shows the size of paper loaded in the bypass tray.

(B)The currently selected paper type will be displayed.

(A) (B)

	Bypass Tray Type/Size Setting					Cancel
	Select the paper type.
							1/2
6		Plain	Letter Head	Thin Paper	Transparency
		Pre-Printed	Pre-Punched	Heavy Paper	Tab Paper
		Recycled	Colour	Labels	Envelope
								1/2

Select the type of paper used in the bypass tray.

Select the paper type to be used.

Bypass Tray Type/Size Setting				Type	OK
			Size
	Type
					8K
			12x18,11x17,81/2x14
		Auto-Inch
	Recycled		81/2x11,81/2x11R,51/2x81/2R
			71/4x101/2R,A3,A4,B4,B5		16K
			A3W,A3,A4,A4R,A5R,B4
		Auto-AB	B5,B5R,216x330(81/2x13)
					16KR
			11x17,81/2x11
		Custom Size	X420 Y297

2/2

7	Bypass Tray Type/Size Setting						Type			OK
		Type
										OK
			Auto-Inch
		Recycled
						((148		432)
				X	420
							mm
			Auto-AB
				Y			(100	297)
					297
							mm
			Custom Size
				AB					Inch

Set the paper size.

Touch the [Auto-Inch] key, the [Auto-AB] key, or the [Custom Size] key. To use a paper size used in China, touch [8K], [16K], or [16KR]. After selecting the setting, touch the [OK] key.

[Auto-Inch] key

When the paper inserted in the bypass tray is an inch size (8-1/2" x 11", etc.), the paper size will be detected automatically and the appropriate paper size set.

[Auto-AB] key

When the paper inserted in the bypass tray is an AB size (A4 size, etc.), the paper size will be detected automatically and the appropriate paper size set.

[Custom Size] key

Touch this key when you know the size of the inserted paper but it is not one of the inch or AB sizes.

When the key is touched, the paper size entry screen appears. Touch the [X] key and enter the horizontal dimension of the

paper with the keys, and then touch the [Y] key and enter the vertical dimension. When finished, touch the [OK] key.

•When [Envelope] is selected, touch the envelopes size key. When finished, touch the [OK] key.

•When [Tab Paper] is selected, check the tab paper size, or touch the [Auto-Inch] key or the [Auto-AB] key. When finished , touch the [OK] key.

29