Sharp MX-2700G manual Adjust the original guides to the size of the originals, Place the original

Page 35

Adjust the original guides to the size of the originals.

2

3

Indicator line

1

Place the original.

Make sure the edges of the originals are even.

Insert the originals face up all the way into the document feeder tray.

The stack of originals must not be higher than the indicator line (maximum of 100 sheets).

Mixed size originals (placing different sizes of originals together)

When using the automatic document feeder, originals of different sizes in the range of combinations shown below can be scanned together.

When scanning mixed sizes of originals, be sure to touch the [Mixed Size Original] key in the special modes and select [Same Width] or [Different Width].

The following combinations of original sizes can be used.

When the originals are the same width

Touch the [Mixed Size Original] key in the special modes and select [Same Width].

Place the originals with the sides that are the same length aligned on the left.

A3 (11" x 17")

A4 (8-1/2" x 11")

When the originals are different widths

Touch the [Mixed Size Original] key in the special modes and select [Different Width].

Align the originals here in the document feeder

 

tray.

B4

B4

(8-

 

(8-1/2" x 14")

1/2" x 14")

 

 

A3 (11" x 17")

Allowed combinations of sizes

A3 and A4, B4 and B5, A4R and A5 (11" x 17" and

8-1/2" x 11", 8-1/2" x 14" and 8-1/2" x 11"R, 8-1/2" x 14" and 5-1/2" x 8-1/2", 8-1/2" x 13" and 8-1/2" x 11"R, 8-1/2" x 13" and 5-1/2" x 8-1/2", 8-1/2" x 11"R and 5-1/2" x 8-1/2")

Allowed combinations of sizes

A3 and B4, A3 and B5, A4 and B4, A4 and B5, B4 and A4R, B4 and A5, B5 and A4R, B5 and A5 (11" x 17" and 8-1/2" x 14", 11" x 17" and 8-1/2" x 13", 11" x 17" and 5-1/2" x 8-1/2")

Combinations of sizes other than the above cannot be used for "Different Width". 2-sided scanning is not possible when "Different Width" is selected.

34

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Users Guide Table of Contents Manuals Provided with the Machine Manual name ContentsAbout this Manual Icons used in the manuals Exterior Part Names and FunctionsTray Tray 4 when a stand/2 x 500 sheet paper drawer is installedSaddle stitch finisher Interior Automatic document feeder Document cover LAN connecter ConnectorsUSB connecter a type USB connecter B typeOperation Panel Clear ALL key Power Save key / indicatorPower key Main power indicatorExample Using the touch panelSystem Settings Administrator Keys Touch Sound Touch PanelPRINT/SEND Status JOB Status When using the fax or Internet fax functions Turning the Power on and OFFTurning on the power Turning off the powerEnergy Save Functions Power Save KEYPreheat Mode Auto power shut-off mode Sleep modeWith the numeric keys User AuthenticationAuthentication by User Number Enter your user number 5 to 8 digitsIf an incorrect user number is entered 3 times in a row Select your user name Authentication by Login Name / PasswordTouch the Login Name key or the key When logging in using the Direct Entry key Touch the Password keyIf you are logging in using a user selection key System Settings Administrator User Registration Tray numbers Important Points about PaperNames and Locations of Trays More information on plain paper and special paper Meaning of R in Paper SizesUseable Paper Paper that is not recommended Paper that cannot be usedLoading Paper Tray Settings for Trays 1 toChanging the Paper Size If you changed the paper loaded in tray 1 to tray System Settings Paper Tray SettingsSet the paper size and paper type Place the paper in the centre of the paper table Pull out traySystem Settings Paper Tray Settings Open the bypass tray Loading Paper in the Bypass TraySet the paper size Open the paper settings screenTouch the paper type key of the bypass tray Select the type of paper used in the bypass traySelect the bypass tray Important Points When Using the Bypass TrayInserting paper Inserting tab paperExample of loading a envelope Inserting transparency filmInserting postcards and envelopes Example of inserting a postcardClose the right side cover Pull out the right side coverMake sure an original does not remain Allowed original weightsPlacing the Original Placing Originals in the Automatic Document FeederPlace the original Adjust the original guides to the size of the originalsWhen the originals are the same width When the originals are different widthsPositions Allowed original sizes Maximum original size Placing the Original on the Document GlassOpen the automatic document feeder Place the original Close the automatic document feederFeeder will rise Placing a thick bookHinges supporting the automatic document feeder Product name Product number Description Peripheral DevicesMX-PBX1 Supplies FinisherPart Names Replacing the staple cartridge Finisher MaintenanceClose the cover Removing staple jamsReplace the staple case Slide the finisher back to the rightSlide the finisher back to the right Gently push the box back Close the cover Discarding punch waste when a punch module is installedFront cover Saddle stitch tray Saddle Stitch FinisherStapler compiler Stapler sectionOpen the front cover Pull out the stapler section Saddle Stitch Finisher MaintenanceClose the front cover Insert a new staple cartridge into the staple casePush the stapler section back Remove any paper from the stapler compiler Remove the misfed paper Push the stapler section back Discarding punch waste when a punch module is installed Black lines White lines Regular MaintenanceExamples of lines in the image As shown in Figure Cleaning the Main Charger of the Photoconductive DrumCleaning the Bypass Feed Roller Release the waste toner box Cleaning the Laser UnitRemove the dirty cleaner from the tip of the cleaning tool Make sure that the cleaner at the tipCleaning tool is not dirty Pull the replacement cleaner out of the waste toner boxPush the waste toner box into the machine Clean the laser unitRepeat to clean all holes in the laser unit 4 holes Replace the cleaning tool Example Replacing the yellow toner cartridge Replacing the Toner CartridgesPull the toner cartridge toward you Locations of colour toner cartridgesPush the cartridge in until it locks securely in place Remove the protective material from the new toner cartridgeInsert the new toner cartridge horizontally Page Place the box on a flat surface Replacing the Waste Toner BOXOpen the front cover Release the used waste toner box Remove the waste toner boxPlug the holes Install the new waste toner boxRemove the seals around the holes Close the front cover Key Description Functions of the Main KeysCharacters key Changing the Entry ModeSymbols key Entering Text from AN External KeyboardUsers GuideMODEL MX-2300G MX-2700G MX-2300N MX-2700N
Related manuals
Manual 170 pages 14.13 Kb Manual 61 pages 44.33 Kb Manual 132 pages 48.37 Kb Manual 88 pages 18.8 Kb

MX-2700G, MX-2300G specifications

The Sharp MX-2700N, MX-2700G, MX-2300N, and MX-2300G are advanced multifunction printers designed to meet the demanding needs of modern offices. These devices offer a robust set of features that make them ideal for businesses requiring high-quality printing, copying, scanning, and faxing capabilities.

One of the standout features of the MX series is the superior image quality produced by the advanced Sharp imaging technology. With a resolution of up to 1200 x 1200 dpi, users can expect crisp, professional-grade prints that enhance the readability of documents and the vibrancy of color images. The devices utilize a high-temperature fixing system that reduces energy consumption while improving output speed and quality.

The MX-2700N and MX-2700G are particularly geared towards larger organizations, boasting a printing speed of up to 27 pages per minute for black and white and color documents. These machines come equipped with a large paper capacity, handling up to 3,100 sheets, with multiple paper trays to accommodate various media sizes and types. Meanwhile, the MX-2300N and MX-2300G provide similar functionality with slightly lower speeds, accommodating efficient workflows in small to medium-sized enterprises.

Both models are powered by the Sharp OSA platform, which facilitates seamless integration with various business applications. This allows users to scan directly to different cloud services, enhancing document management and accessibility. Additionally, the intuitive touchscreen interface simplifies operation, enabling users to quickly navigate through functions and customize their settings.

Security features are also a prominent aspect of the MX series, with data encryption and user authentication capabilities that protect sensitive information from unauthorized access. Furthermore, automatic document feeders and duplex printing capabilities help streamline everyday tasks, improving overall productivity.

Considering environmental impact, Sharp has designed these models with sustainability in mind, incorporating energy-saving technologies and recyclable consumables. In summary, the Sharp MX-2700N, MX-2700G, MX-2300N, and MX-2300G deliver outstanding performance, versatility, and quality, making them an excellent choice for any office environment aiming for efficiency and eco-friendliness.
Top Page Image Contents