Sharp MX-2300G, MX-2700G Saddle Stitch Finisher, Stapler compiler, Stapler section, Top cover

Page 46

SADDLE STITCH FINISHER

The saddle stitch finisher is equipped with the offset function that offsets each set of output from the previous set, the staple sort function that staples each set of output, and the saddle stitch function that automatically staples and folds each set of output at the centreline.

An optional hole punching unit can also be installed to punch holes in output.

PART NAMES

(1)

(2)

(3)

(1)Stapler compiler

This temporarily stacks paper to be stapled.

(2)Output tray

Stapled and offset output is delivered to this tray. The tray is slidable. Extend the tray for large output (A3W, A3, B4, 12" x18", 11" x 17", 8-1/2" x 14" and 8-1/2" x 13" sizes).

(4)

(5)

(6)

(7)

(5)Lever

To remove a staple jam or paper misfeed, pull this lever and slide the saddle stitch finisher to the left until it stops.

(6)Stapler section

Open the front cover and pull out this section to replace the staple cartridge or remove a staple jam.

(7)Front cover

(3)Saddle stitch tray

Stapled and folded output is delivered to this tray.

(4)Top cover

Open this cover to remove a paper misfeed.

Open this cover to replace the staple cartridge or remove a staple jam.

• A paper pass unit is required to install a saddle stitch finisher.

• Do not place heavy objects on the saddle stitch finisher or press down on the saddle stitch finisher.

•Use caution when you turn on the power and when printing is taking place, as the tray may move up and down.

•A saddle stitch finisher and a finisher cannot be installed simultaneously.

SUPPLIES

The saddle stitch finisher requires the following staple cartridge:

•Staple cartridge

(approx. 5000 staples per cartridge x 3 cartridges) AR-SC2

45

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Users Guide Table of Contents About this Manual Manual name ContentsManuals Provided with the Machine Icons used in the manuals Part Names and Functions ExteriorSaddle stitch finisher Tray 4 when a stand/2 x 500 sheet paper drawer is installedTray Interior Automatic document feeder Document cover USB connecter B type ConnectorsUSB connecter a type LAN connecterOperation Panel Main power indicator Power Save key / indicatorPower key Clear ALL keyTouch Panel Using the touch panelSystem Settings Administrator Keys Touch Sound ExamplePRINT/SEND Status JOB Status Turning off the power Turning the Power on and OFFTurning on the power When using the fax or Internet fax functionsAuto power shut-off mode Sleep mode Power Save KEYPreheat Mode Energy Save FunctionsEnter your user number 5 to 8 digits User AuthenticationAuthentication by User Number With the numeric keysIf an incorrect user number is entered 3 times in a row Touch the Login Name key or the key Authentication by Login Name / PasswordSelect your user name If you are logging in using a user selection key Touch the Password keyWhen logging in using the Direct Entry key System Settings Administrator User Registration Names and Locations of Trays Important Points about PaperTray numbers Useable Paper Meaning of R in Paper SizesMore information on plain paper and special paper Paper that cannot be used Paper that is not recommendedTray Settings for Trays 1 to Loading PaperChanging the Paper Size Set the paper size and paper type System Settings Paper Tray SettingsIf you changed the paper loaded in tray 1 to tray Pull out tray Place the paper in the centre of the paper tableSystem Settings Paper Tray Settings Loading Paper in the Bypass Tray Open the bypass traySelect the type of paper used in the bypass tray Open the paper settings screenTouch the paper type key of the bypass tray Set the paper sizeInserting tab paper Important Points When Using the Bypass TrayInserting paper Select the bypass trayExample of inserting a postcard Inserting transparency filmInserting postcards and envelopes Example of loading a envelopePull out the right side cover Close the right side coverPlacing Originals in the Automatic Document Feeder Allowed original weightsPlacing the Original Make sure an original does not remainWhen the originals are different widths Adjust the original guides to the size of the originalsWhen the originals are the same width Place the originalPositions Close the automatic document feeder Placing the Original on the Document GlassOpen the automatic document feeder Place the original Allowed original sizes Maximum original sizeHinges supporting the automatic document feeder Placing a thick bookFeeder will rise Peripheral Devices Product name Product number DescriptionMX-PBX1 Part Names FinisherSupplies Finisher Maintenance Replacing the staple cartridgeSlide the finisher back to the right Removing staple jamsReplace the staple case Close the coverSlide the finisher back to the right Discarding punch waste when a punch module is installed Gently push the box back Close the coverStapler section Saddle Stitch FinisherStapler compiler Front cover Saddle stitch traySaddle Stitch Finisher Maintenance Open the front cover Pull out the stapler sectionPush the stapler section back Insert a new staple cartridge into the staple caseClose the front cover Remove any paper from the stapler compiler Remove the misfed paper Push the stapler section back Discarding punch waste when a punch module is installed Examples of lines in the image Regular MaintenanceBlack lines White lines Cleaning the Bypass Feed Roller Cleaning the Main Charger of the Photoconductive DrumAs shown in Figure Cleaning the Laser Unit Release the waste toner boxPull the replacement cleaner out of the waste toner box Make sure that the cleaner at the tipCleaning tool is not dirty Remove the dirty cleaner from the tip of the cleaning toolRepeat to clean all holes in the laser unit 4 holes Clean the laser unitPush the waste toner box into the machine Replace the cleaning tool Locations of colour toner cartridges Replacing the Toner CartridgesPull the toner cartridge toward you Example Replacing the yellow toner cartridgeInsert the new toner cartridge horizontally Remove the protective material from the new toner cartridgePush the cartridge in until it locks securely in place Page Remove the waste toner box Replacing the Waste Toner BOXOpen the front cover Release the used waste toner box Place the box on a flat surfaceRemove the seals around the holes Install the new waste toner boxPlug the holes Close the front cover Functions of the Main Keys Key DescriptionEntering Text from AN External Keyboard Changing the Entry ModeSymbols key Characters keyUsers GuideMODEL MX-2300G MX-2700G MX-2300N MX-2700N
Related manuals
Manual 170 pages 14.13 Kb Manual 61 pages 44.33 Kb Manual 132 pages 48.37 Kb Manual 88 pages 18.8 Kb

MX-2700G, MX-2300G specifications

The Sharp MX-2700N, MX-2700G, MX-2300N, and MX-2300G are advanced multifunction printers designed to meet the demanding needs of modern offices. These devices offer a robust set of features that make them ideal for businesses requiring high-quality printing, copying, scanning, and faxing capabilities.

One of the standout features of the MX series is the superior image quality produced by the advanced Sharp imaging technology. With a resolution of up to 1200 x 1200 dpi, users can expect crisp, professional-grade prints that enhance the readability of documents and the vibrancy of color images. The devices utilize a high-temperature fixing system that reduces energy consumption while improving output speed and quality.

The MX-2700N and MX-2700G are particularly geared towards larger organizations, boasting a printing speed of up to 27 pages per minute for black and white and color documents. These machines come equipped with a large paper capacity, handling up to 3,100 sheets, with multiple paper trays to accommodate various media sizes and types. Meanwhile, the MX-2300N and MX-2300G provide similar functionality with slightly lower speeds, accommodating efficient workflows in small to medium-sized enterprises.

Both models are powered by the Sharp OSA platform, which facilitates seamless integration with various business applications. This allows users to scan directly to different cloud services, enhancing document management and accessibility. Additionally, the intuitive touchscreen interface simplifies operation, enabling users to quickly navigate through functions and customize their settings.

Security features are also a prominent aspect of the MX series, with data encryption and user authentication capabilities that protect sensitive information from unauthorized access. Furthermore, automatic document feeders and duplex printing capabilities help streamline everyday tasks, improving overall productivity.

Considering environmental impact, Sharp has designed these models with sustainability in mind, incorporating energy-saving technologies and recyclable consumables. In summary, the Sharp MX-2700N, MX-2700G, MX-2300N, and MX-2300G deliver outstanding performance, versatility, and quality, making them an excellent choice for any office environment aiming for efficiency and eco-friendliness.
Top Page Image Contents