Sharp MX-2700G, MX-2300G manual Part Names and Functions, Exterior

Page 5

1 BEFORE USING THE MACHINE

This chapter provides basic information about the machine. Please read this chapter before using the machine.

PART NAMES AND FUNCTIONS

EXTERIOR

(1)

(2)

(3) (4)

(5)

(6)

(7)

When an automatic document feeder is not installed.

(1)Document cover*1, *2

This holds down the original.

(2)Reversing single pass feeder*1, *2 (automatic document feeder)

This automatically feeds and scans multiple originals. Both sides of two-sided originals can be automatically scanned.

☞PLACING THE ORIGINAL (page 33)

(3)Front cover

Open this cover to switch the main power switch to "On" or "Off" or to replace a toner cartridge.

☞TURNING THE POWER ON AND OFF (page 13)

☞REPLACING THE TONER CARTRIDGES (page 58)

(4)Paper pass unit*1

This transfers output to the saddle stitch finisher.

When a finisher, paper pass unit and saddle stitch finisher (peripheral devices) are not installed.

(8)

When a finisher (peripheral device) is installed.

(5)Operation panel

This is used to select functions and enter the number of copies.

☞OPERATION PANEL (page 9)

(6)Exit tray unit (right tray)*1

When installed, output can be delivered to this tray.

(7)Output tray (centre tray)

Copy jobs and print jobs are delivered to this tray.

(8)Finisher*1

This can be used to staple output. A punch module can also be installed to punch holes in output.

☞FINISHER (page 40)

*1 Peripheral Devices

The peripheral devices are generally optional, however, some models include certain peripheral devices as standard equipment.

*2 The MX-2300N/MX-2700N are equipped as standard with peripheral devices. On the MX-2300G/MX-2700G, you can select whether to equip the machine with a document cover or a reversing single pass feeder.

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Users Guide Table of Contents Manuals Provided with the Machine Manual name ContentsAbout this Manual Icons used in the manuals Exterior Part Names and FunctionsTray Tray 4 when a stand/2 x 500 sheet paper drawer is installedSaddle stitch finisher Interior Automatic document feeder Document cover USB connecter a type ConnectorsUSB connecter B type LAN connecterOperation Panel Power key Power Save key / indicatorMain power indicator Clear ALL keySystem Settings Administrator Keys Touch Sound Using the touch panelTouch Panel ExamplePRINT/SEND Status JOB Status Turning on the power Turning the Power on and OFFTurning off the power When using the fax or Internet fax functionsPreheat Mode Power Save KEYAuto power shut-off mode Sleep mode Energy Save FunctionsAuthentication by User Number User AuthenticationEnter your user number 5 to 8 digits With the numeric keysIf an incorrect user number is entered 3 times in a row Select your user name Authentication by Login Name / PasswordTouch the Login Name key or the key When logging in using the Direct Entry key Touch the Password keyIf you are logging in using a user selection key System Settings Administrator User Registration Tray numbers Important Points about PaperNames and Locations of Trays More information on plain paper and special paper Meaning of R in Paper SizesUseable Paper Paper that is not recommended Paper that cannot be usedLoading Paper Tray Settings for Trays 1 toChanging the Paper Size If you changed the paper loaded in tray 1 to tray System Settings Paper Tray SettingsSet the paper size and paper type Place the paper in the centre of the paper table Pull out traySystem Settings Paper Tray Settings Open the bypass tray Loading Paper in the Bypass TrayTouch the paper type key of the bypass tray Open the paper settings screenSelect the type of paper used in the bypass tray Set the paper sizeInserting paper Important Points When Using the Bypass TrayInserting tab paper Select the bypass trayInserting postcards and envelopes Inserting transparency filmExample of inserting a postcard Example of loading a envelopeClose the right side cover Pull out the right side coverPlacing the Original Allowed original weightsPlacing Originals in the Automatic Document Feeder Make sure an original does not remainWhen the originals are the same width Adjust the original guides to the size of the originalsWhen the originals are different widths Place the originalPositions Open the automatic document feeder Place the original Placing the Original on the Document GlassClose the automatic document feeder Allowed original sizes Maximum original sizeFeeder will rise Placing a thick bookHinges supporting the automatic document feeder Product name Product number Description Peripheral DevicesMX-PBX1 Supplies FinisherPart Names Replacing the staple cartridge Finisher MaintenanceReplace the staple case Removing staple jamsSlide the finisher back to the right Close the coverSlide the finisher back to the right Gently push the box back Close the cover Discarding punch waste when a punch module is installedStapler compiler Saddle Stitch FinisherStapler section Front cover Saddle stitch trayOpen the front cover Pull out the stapler section Saddle Stitch Finisher MaintenanceClose the front cover Insert a new staple cartridge into the staple casePush the stapler section back Remove any paper from the stapler compiler Remove the misfed paper Push the stapler section back Discarding punch waste when a punch module is installed Black lines White lines Regular MaintenanceExamples of lines in the image As shown in Figure Cleaning the Main Charger of the Photoconductive DrumCleaning the Bypass Feed Roller Release the waste toner box Cleaning the Laser UnitCleaning tool is not dirty Make sure that the cleaner at the tipPull the replacement cleaner out of the waste toner box Remove the dirty cleaner from the tip of the cleaning toolPush the waste toner box into the machine Clean the laser unitRepeat to clean all holes in the laser unit 4 holes Replace the cleaning tool Pull the toner cartridge toward you Replacing the Toner CartridgesLocations of colour toner cartridges Example Replacing the yellow toner cartridgePush the cartridge in until it locks securely in place Remove the protective material from the new toner cartridgeInsert the new toner cartridge horizontally Page Open the front cover Release the used waste toner box Replacing the Waste Toner BOXRemove the waste toner box Place the box on a flat surfacePlug the holes Install the new waste toner boxRemove the seals around the holes Close the front cover Key Description Functions of the Main KeysSymbols key Changing the Entry ModeEntering Text from AN External Keyboard Characters keyUsers GuideMODEL MX-2300G MX-2700G MX-2300N MX-2700N
Related manuals
Manual 170 pages 14.13 Kb Manual 61 pages 44.33 Kb Manual 132 pages 48.37 Kb Manual 88 pages 18.8 Kb

MX-2700G, MX-2300G specifications

The Sharp MX-2700N, MX-2700G, MX-2300N, and MX-2300G are advanced multifunction printers designed to meet the demanding needs of modern offices. These devices offer a robust set of features that make them ideal for businesses requiring high-quality printing, copying, scanning, and faxing capabilities.

One of the standout features of the MX series is the superior image quality produced by the advanced Sharp imaging technology. With a resolution of up to 1200 x 1200 dpi, users can expect crisp, professional-grade prints that enhance the readability of documents and the vibrancy of color images. The devices utilize a high-temperature fixing system that reduces energy consumption while improving output speed and quality.

The MX-2700N and MX-2700G are particularly geared towards larger organizations, boasting a printing speed of up to 27 pages per minute for black and white and color documents. These machines come equipped with a large paper capacity, handling up to 3,100 sheets, with multiple paper trays to accommodate various media sizes and types. Meanwhile, the MX-2300N and MX-2300G provide similar functionality with slightly lower speeds, accommodating efficient workflows in small to medium-sized enterprises.

Both models are powered by the Sharp OSA platform, which facilitates seamless integration with various business applications. This allows users to scan directly to different cloud services, enhancing document management and accessibility. Additionally, the intuitive touchscreen interface simplifies operation, enabling users to quickly navigate through functions and customize their settings.

Security features are also a prominent aspect of the MX series, with data encryption and user authentication capabilities that protect sensitive information from unauthorized access. Furthermore, automatic document feeders and duplex printing capabilities help streamline everyday tasks, improving overall productivity.

Considering environmental impact, Sharp has designed these models with sustainability in mind, incorporating energy-saving technologies and recyclable consumables. In summary, the Sharp MX-2700N, MX-2700G, MX-2300N, and MX-2300G deliver outstanding performance, versatility, and quality, making them an excellent choice for any office environment aiming for efficiency and eco-friendliness.
Top Page Image Contents