Sharp AL-1340 operation manual Hooks

Page 16

LOADING COPY PAPER

	2	Remove the pressure plate lock. Rotate the pressure plate lock in the direction of the
	2	arrow to remove it while pressing down the pressure plate of the paper tray.

Installation

Store the pressure plate lock which has been removed in step 2 and the screw which

3 has been removed when unpacking (see page 11, step 2 of REMOVING PROTECTIVE PACKING MATERIALS) in the front of the paper tray.To store the pressure plate lock, rotate the lock to fix it on the relevant location.

Pressure plate lock

Screw

4	Adjust the paper guides on the paper tray to the copy paper width and length.
4	Squeeze the lever of paper guide and slide the guide to match with the width of the

	paper.
	Move paper guide	to the appropriate slot as marked on the tray.

Paper guide BPaper guide A

	5	Fan the copy paper and insert it into the tray. Make sure the edges go under the corner
	5	hooks.
		hooks.

Do not load paper above the maximum height line ( ). Exceeding the line will cause a paper misfeed.

Image 16

Contents AL-1340 For Your Protection Or 1-877-SHARP-CC toll free/905-568-7140 in CanadaContents Appendix Introduction Getting StartedConventions used in this manual High-speed laser copying Main FeaturesHigh-quality digital image Printer feature Substantial copying functionsScan once/ Print many Environmentally friendly designPart Names Operation Panel Installation Copier InstallationDo not touch the surface green portion of the drum cartridge Checking Packed Components and Accessories Unpacking Installing the TD Cartridge Removing Protective Packing MaterialsOn both sides and shake it horizontally four or five times Loading Copy Paper installing the paper tray Hooks Power to Copier Power on Initial settings of operation panelMaking Copies PaperNormal Copying Setting a large original Exposure ADJUSTMENT/PHOTO Copying REDUCTION/ENLARGEMENT/ZOOMTo select a preset copy ratio To select a zoom ratio Bypass Feed special paperTWO-SIDED Copying Toner Save Mode Preheat modeAuto power shut-off mode Special FunctionsSetting the power save modes and auto clear time User ProgramsOFF Supplies and User Maintenance TD Cartridge ReplacementDrum Cartridge Replacement TD CartridgeUser Maintenance CabinetOriginal table and original cover Transfer chargerWhen copier is not in use Misfeed Removal Copier TROUBLE?Misfeed in the paper feed area Misfeed in the fusing area Lower the fusing unit release leverMisfeed in the transport area Troubleshooting Problem Possible cause Solution SeeDisplaying Total Number of Copies Status IndicatorsIndication Cause and remedy See Automatic Exposure Adjustment Specifications AppendixSupply list Supply Part Numbers and StorageProper storage TD Cartridge Replacement Moving InstructionsIndex NamesPacked components Paper Loading Special Memo For users in the USA Sharp Electronics Corporation

hooks.