Sharp AL-1340 operation manual Power on, Initial settings of operation panel

Page 18

2

Installation

POWER ON

Turn the power switch on the left side of the copier to the “ON” position.The ready () indicator will light up and other indicators which show the initial settings of the operation panel will also light up to indicate the ready condition. For the initial settings, see the “Initial settings of operation panel” described below.

●The copier will enter a power save mode once the set time has elapsed without

any copier operation after the last copy of a run is made or power is turned on. The settings of the power save modes can be modified. See page 24, USER PROGRAMS.

●The copier will return to the initial settings a preset amount of time after the last copy is made.The preset amount of time (auto clear time) can be changed. See page 24, USER PROGRAMS.

Initial settings of operation panel

The copier assumes the initial settings when the copier is turned on or a preset time (auto clear time) elapses after the last copy is made. The initial settings of the operation panel are shown below.

	200%	MAX.
	129%	51/2x81/2 81/2x11
	100%	100%
	78%	81/2x14 81/2x11
	64%	81/2x11 51/2x81/2	ZOOM
	50%	MIN.	ZOOM
	50%	MIN.

“0” is displayed in the display.

16

Image 18

Contents AL-1340 For Your Protection Or 1-877-SHARP-CC toll free/905-568-7140 in CanadaContents Appendix Getting Started IntroductionConventions used in this manual Main Features High-speed laser copyingHigh-quality digital image Scan once/ Print many Printer featureSubstantial copying functions Environmentally friendly designPart Names Operation Panel Installation Copier InstallationDo not touch the surface green portion of the drum cartridge Checking Packed Components and Accessories UnpackingInstalling the TD Cartridge Removing Protective Packing MaterialsOn both sides and shake it horizontally four or five times Loading Copy Paper installing the paper tray Hooks Power to Copier Power on Initial settings of operation panelMaking Copies PaperNormal Copying Setting a large original Exposure ADJUSTMENT/PHOTO Copying REDUCTION/ENLARGEMENT/ZOOMTo select a preset copy ratio To select a zoom ratio Bypass Feed special paperTWO-SIDED Copying Auto power shut-off mode Toner Save ModePreheat mode Special FunctionsSetting the power save modes and auto clear time User ProgramsOFF Supplies and User Maintenance TD Cartridge ReplacementDrum Cartridge Replacement TD CartridgeUser Maintenance CabinetOriginal table and original cover Transfer chargerWhen copier is not in use Copier TROUBLE? Misfeed RemovalMisfeed in the paper feed area Misfeed in the fusing area Lower the fusing unit release leverMisfeed in the transport area Troubleshooting Problem Possible cause Solution SeeStatus Indicators Displaying Total Number of CopiesIndication Cause and remedy See Automatic Exposure Adjustment Specifications AppendixSupply Part Numbers and Storage Supply listProper storage TD Cartridge Replacement Moving InstructionsIndex NamesPacked components Paper Loading Special Memo For users in the USA Sharp Electronics Corporation