Sharp AL-1340 operation manual Normal Copying

Page 20

NORMAL COPYING

	1	Ensure that paper of the desired size is set in the paper tray. See page 13, LOADING
	1	COPY PAPER. When copying onto 8-1/2" x 11" paper or a larger size, pull out the

		paper output tray extension.

3

Making copies

2	Turn the power switch on.

3	Open the original cover.

	4	Place the original face down on the original table. Align it with the original scale and
	4	the centering ( ) mark.
		the centering ( ) mark.
		Original scale

mark

Gently close the original cover. When copying a book or an original which has been

5 folded or a crumpled original, press down the original cover lightly. If the original cover is not securely closed, the copies may be striped or blurred.

A book, an original which has been folded, a crumpled original

18

Image 20

Contents AL-1340 For Your Protection Or 1-877-SHARP-CC toll free/905-568-7140 in CanadaContents Appendix Conventions used in this manual Getting StartedIntroduction High-quality digital image Main FeaturesHigh-speed laser copying Printer feature Substantial copying functionsScan once/ Print many Environmentally friendly designPart Names Operation Panel Installation Copier InstallationDo not touch the surface green portion of the drum cartridge Checking Packed Components and Accessories UnpackingInstalling the TD Cartridge Removing Protective Packing MaterialsOn both sides and shake it horizontally four or five times Loading Copy Paper installing the paper tray Hooks Power to Copier Power on Initial settings of operation panelMaking Copies PaperNormal Copying Setting a large original Exposure ADJUSTMENT/PHOTO Copying REDUCTION/ENLARGEMENT/ZOOMTo select a preset copy ratio To select a zoom ratio Bypass Feed special paperTWO-SIDED Copying Toner Save Mode Preheat modeAuto power shut-off mode Special FunctionsSetting the power save modes and auto clear time User ProgramsOFF Supplies and User Maintenance TD Cartridge ReplacementDrum Cartridge Replacement TD CartridgeUser Maintenance CabinetOriginal table and original cover Transfer chargerWhen copier is not in use Misfeed in the paper feed area Copier TROUBLE?Misfeed Removal Misfeed in the fusing area Lower the fusing unit release leverMisfeed in the transport area Troubleshooting Problem Possible cause Solution SeeIndication Cause and remedy See Status IndicatorsDisplaying Total Number of Copies Automatic Exposure Adjustment Specifications AppendixProper storage Supply Part Numbers and StorageSupply list TD Cartridge Replacement Moving InstructionsIndex NamesPacked components Paper Loading Special Memo For users in the USA Sharp Electronics Corporation