8. Downloading the contents of the programming to satellites – master
When you have completed the programming at the master, you can distribute the preset data from the master to all or desired satellites in the IRC system.
(1) Initial downloading
For initial setup of the IRC system, follow the downloading procedure below. When the preset data in the master is downloaded to each satellite, existing preset data in the satellite, if any, is cleared.
1. Enter the PGM2 mode from the mode selection window.
2. Select “INITIAL D/L” and press the ekey. The INITIAL D/L window will appear.
3. If you wish to distribute all preset data files in the master to satellites, select “ALL PGM” and press the ekey. If you wish to distribute an individual preset data file, select the corresponding data item and press the ekey.
Enter an appropriate code range if needed. The MACHINE No. window will appear.
4. If you wish to download the preset data to all satellites, select “ALL” and press the ekey. If you wish to download the data to certain satellite(s), select “MACHINE SELECT” and press the ekey. In this case, the MACHINE SELECT window will open.
Move the cursor to the corresponding machine numbers, select “YES,” and press the ckey.
NOTE | Check the contents of the programming of all the satellites in the IRC system that have received | |
the preset data. | ||
|
13