Sharp UP-820F, UP-820N manual Close store operation Opxz mode master and satellite

Page 9

3. Close store operation (OPXZ mode) – master and satellite

When the close store operation is performed at the master, the IRC system is closed. POS can send AT command by this job. This function controls a modem, but doesn’t have control over registration and T-LOG. The procedure for the close store operation is as follows.

Select “CLOSE STORE” from the OPXZ mode window and press the ekey.

NOTE

• You can also perform the close store operation at each satellite.

•When the close store operation is performed, the data remaining in the T-LOG buffers of all the satellites is collected by the master.

•When a transmission error occurs during the close store operation, the operation is regarded as normally terminated if the system retry function* has been disabled by programming. When the master has been programmed to enable the system retry function, it displays the machine number of the satellite that has encountered the error. Selecting the displayed machine number will display a prompt to retry the close store operation.

* For the system retry function, see page 63–64.

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents UP-820F UP-820N Page Table of Contents Page Introduction Message displayed during inline communication Message displayList of error messages Error messagesOpen store operation Opxz mode master and satellite Close store operation Opxz mode master and satellite Centralized clerk file system Clerk systemIndividual clerk file system Sign-on operation clerk assignment REG mode/MGR mode Sign-on procedureClerk assignment Clerk sign-on report Report generation procedureCashier sign-off procedure Sign-off procedureInitial downloading Maintenance downloading Downloading Jobs Description List of downloading jobs PGM2 modePage Look-up and updating of the GLU file Centralized GLU file systemIndividual GLU file system PLU/EAN stock control Centralized systemIndividual system LOG polling Stored in its T-LOG buffer PLU/EAN data controlUpdating Updating learning function Customer data control Price change functionSecond back-up remote printer Communication with a remote printer optionRerouting print data Operating modes Consolidated and Individual ReportsConsolidated reports master/back-up master Report generation procedureDepartment DEPT. /GROUP List of consolidated reports System READING/RESETTINGPersonnel ALL Clerk Individual reports master/back-up master/satellite List of individual reports READING/RESETTING Journal Resetting reports in a system with no save file Clerk report Sharp dealer Cashier report Type of report Clerk/Cashier Reset clear operation X1/Z1 and X2/Z2 modes master IRC Programming Setting the machine numbers master and satellitePage Page Master list for IRC communications Deleting a machine from the master listSpecifying the terminal to serve as a back-up master master Unsuccessful transmission depending on the selection made Page Page Sample Print satellite Programming for the remote printer BUILT-IN820 BUILT-IN810 Auto Cutter Items to be programmedPage Separator Line Programming of the MWS terminal number Programming of the gateway number Programming of the time-out timeTerminal No Time-out time 7 sec Gateway No How the IRC back-up system works System Back-UpFlow of a master declaration at the back-up master Master declarationPage Flow of a master declaration at the master Flow of a recovery declaration at the back-up master Recovery declarationPage Flow of a recovery declaration at the master Manual clearing procedure Clearing procedureManual clear operation Description Terminal*1 Remarks List of manual clearing itemsSystem retry function When the system retry function is disabledWhen the system retry function is enabled Basic Specifications for LAN UP820F820NV2IE10
Related manuals
Manual 242 pages 54.69 Kb Manual 242 pages 43.78 Kb Manual 277 pages 4.18 Kb
Top Page Image Contents