Sharp XG-C40XU operation manual Selecting the On-screen Display Language

Selecting the On-screen Display Language

Projector Remote control

1, 5

2, 3

4

(GUI) On-screen Display

Operation

English is the preset language for the On-screen Display. The language can be set to English, German, Spanish, Dutch, French, Italian, Swedish, Portuguese, Chinese, Korean or Japanese.

(Slide the MOUSE/ADJUSTMENT switch	MOUSE ADJ.
on the remote control to the ADJ. position.)

1Press MENU.

2Press ß/© to select “Language”.

3Press ∂/ƒ to select the desired language .

4Press ENTER to save the setting. The On-screen Display is now programed to display in the language selected.

5To exit from the GUI, press MENU.

Selecting the Video Input System Mode (INPUT 3 or 4 mode only)

Projector Remote control

1, 6

2, 3, 4

5

The video input system mode is preset to “Auto”; however, it can be changed to a specific system mode, if the selected system mode is not compatible with the connected audiovisual equipment.

(Slide the MOUSE/ADJUSTMENT switch	MOUSE ADJ.
on the remote control to the ADJ. position.)

1Press MENU.

2Press ß/© to select “Options”.

3Press ∂/ƒ to select “Video System”, and then press ©.

(GUI) On-screen Display	4 Press ∂/ƒ to select the desired video system
	mode.

5Press ENTER to save the setting.

6To exit from the GUI, press MENU.

•When the system mode is set to “Auto”, you may not receive a clear picture due to signal differences. Should this occur, switch to the video system of the source signal.

E-27