Picture Adjustments
Operation
Projector | Remote control |
1, 4
2, 3
(GUI) On-screen Display
Projector | Remote control |
1, 6
2, 3, 4
5
(GUI)
Adjusting the Color Temperature
This function can be used to adjust the color temperature to suit the type of image input to the projector (video, computer image, TV broadcast, etc.). Decrease the color temperature to create warmer, reddish images for natural flesh tones. Increase the color temperature to create cooler, bluish images for a brighter picture.
Description of Color Temperature
−3 
+3 
(Red) ß button | © button (Blue) |
| |||
Decreases color temperature for | Increases color temperature for | ||||
warmer, reddish, | cooler, bluish, |
| |||
images. |
| ||||
(Low color temperature) | (High color temperature) |
| |||
|
|
|
|
|
|
(Slide the MOUSE/ADJUSTMENT switch |
|
|
|
| |
|
| ||||
MOUSE |
|
| ADJ. | ||
on the remote control to the ADJ. position.) |
|
|
|
| |
1Press MENU. Menu bar and “Picture” menu screen appear. GUI operation guide is also displayed.
2Press ∂/ƒ to select “CLR Temp”.
3Press ß/© to move the 
mark of the selected adjustment item to the desired setting.
4To exit from the GUI, press MENU.
Selecting the Signal Type
This function allows you to select the input signal type (COMPUTER/RGB or COMPONENT) for INPUT 1 or 2 port.
(Slide the MOUSE/ADJUSTMENT switch | MOUSE ADJ. |
on the remote control to the ADJ. position.) |
|
1Press MENU.
2Press ß/© to select “Picture”.
3Press ∂/ƒ to select “Signal Type”, and then press ©.
4Press ∂/ƒ to select “Computer/RGB” or “Component”.
5Press ENTER to save the setting.
6To exit from the GUI, press MENU.