Sharp XG-C40XU operation manual Black Screen Function, On-screen Display Override Function

Black Screen Function

Projector Remote control

BLACK

SCREEN

button

1, 5

2, 3, 4

This function can be used to superimpose a black screen over the projected image.

Blacking out the Projected Image

Press BLACK SCREEN. The screen turns black and “BLACK SCREEN” is displayed on the screen. To return to the original projected image, press BLACK SCREEN again.

MOUSE ADJ.

•To use the remote control to operate this function, slide the MOUSE/ADJUSTMENT switch to the MOUSE position before pressing BLACK SCREEN.

Projected Image

sg

(GUI) On-screen Display

Turning off the On-screen Display

The On-screen Display (“BLACK SCREEN”) that appears during black screen can be turned off. When “BLK SCRN Disp” is set to “” in the GUI menu, “BLACK SCREEN” will not be displayed during function.

(Slide the MOUSE/ADJUSTMENT switch	MOUSE ADJ.
on the remote control to the ADJ. position.)

1Press MENU.

2Press ß /© to select “Options”.

3Press ∂/ƒ to select “BLK SCRN Disp”.

4Press ß/© to select “” to turn on or “” to turn off the On-screen Display.

5To exit from the GUI, press MENU.

FeaturesUseful

On-screen Display Override Function

Projector Remote control

This function allows you to turn off the on-screen messages that appear during input select. Once “OSD Display” is set to “” in the GUI menu, the on-screen messages will not appear when INPUT is pressed.

1, 5

2, 3, 4

(GUI) On-screen Display

(Slide the MOUSE/ADJUSTMENT switch on the remote control to the ADJ. position.)

1Press MENU.

2Press ß/© to select “Options”.

3Press ∂/ƒ to select “OSD Display”.

4Press ß/© to select “” to turn on or “ off the On-screen Display.

5To exit from the GUI, press MENU.

MOUSE ADJ.

”to turn

E-39