Sharp XG-C40XU operation manual Selecting the Picture Display Mode, Computer

Selecting the Picture Display Mode

Projector

Remote control	This function allows you to modify or customize the
	picture display mode to enhance the input image.
	Depending on the input signal, you can choose
	NORMAL, FIT TO SCREEN, DOT BY DOT, WIDE or
	NORMAL (WIDE) image.
	1 Press RESIZE. Each time RESIZE is pressed, the
	picture mode changes as shown below.

1

2

2 To return to the standard image, press UNDO while “RESIZE” is displayed on the screen.

COMPUTER

EXAMPLE

			NORMAL		FIT TO SCREEN	DOT BY DOT
	4:3 aspect ratio	SVGA (800  600)	1024	 768	–	800	 600
		XGA (1024  768)	1024	 768	–	1024	 768
	Other aspect ratios	UXGA (1600  1200)	1024	 768	–	1600	 1200
		SXGA (1280  1024)	960	 768	1024  768	1280	 1024
	Input Signal		Output screen image
		NORMAL	FIT TO SCREEN			DOT BY DOT
	4:3 aspect ratio
	Other aspect ratios
VIDEO/DTV	EXAMPLE
			NORMAL		WIDE	NORMAL (WIDE)
	4:3 aspect ratio	4:3	1024  768		1024  576*	768  576*
		Letterbox	1024  768		1024  576*	768  576*
	480I/P, NTSC, PAL, SECAM
		Squeeze		–	1024  576*	768  576*
	16:9 aspect ratio, 720P, 1080i
		480I/P, 720P, 1080i		–	1024  576*		–

*The digital image shift function can be used with these picture display modes.

Input Signal		Output screen image
	NORMAL	WIDE	NORMAL (WIDE)
4:3 aspect ratio
480I/P,
NTSC,
PAL,
SECAM
Letterbox
Squeeze
720P,
1080i
16:9 aspect ratio

Useful Features

E-38