Sharp XG-C40XU Computer Image Adjustments Input 1 or 2 mode Only, Adjusting the Computer Image

Computer Image Adjustments (INPUT 1 or 2 mode Only)

Projector Remote control

1, 5

2, 3, 4

Adjusting the Computer Image

When displaying computer patterns which are very detailed (tiling, vertical stripes, etc.), interference may occur between the LCD pixels, causing flickering, vertical stripes, or contrast irregularities in portions of the screen. Should this occur, adjust “Clock”, “Phase”, “H-Pos” and “V-Pos” for the optimum computer image.

Description of Adjustment Items

Selected item	Description
Clock	Adjusts vertical noise.
Phase	Adjusts horizontal noise (similar to tracking on your VCR).
H-Pos	Centers the on-screen image by moving it to the left or right.
V-Pos	Centers the on-screen image by moving it up or down.

Operation

		• Computer image adjustments can be made easily by
		pressing AUTO SYNC ( ). See page 34 for details.
	(GUI) On-screen Display	(Select the desired computer input mode with INPUT.)
2		(Slide the MOUSE/ADJUSTMENT switch
			MOUSE	ADJ.
		on the remote control to the ADJ. position.)
		1 Press MENU. Menu bar and “Picture” menu
		screen appear. GUI operation guide is also
		displayed.
		2 Press ß/© to select “Fine Sync”.
3		3 Press ∂/ƒ to select a specific adjustment item.
		4 Press ß/© to move the mark of the selected
		adjustment item to the desired setting.
		5 To exit from the GUI, press MENU.
		• To reset all adjustment items, select “Reset” on the “Fine
		Sync” menu screen and press ENTER.

E-31