Computer Image Adjustments (INPUT 1 or 2 mode Only)
Operation
Projector | Remote control |
1, 6
2, 3, 4
5
(GUI) On-screen Display
Special Mode Adjustment
Ordinarily, the type of input signal is detected and the correct resolution mode is automatically selected. However, for some signals, the optimal resolution mode in “Special Modes” on the “Fine Sync” menu screen may need to be selected to match the computer display mode.
(Slide the MOUSE/ADJUSTMENT switch
MOUSE ADJ.
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Fine Sync”.
3Press ∂/ƒ to select “Special Modes”, and then press ©.
4Press ∂/ƒ to select the optimal resolution mode.
5Press ENTER to save the setting.
6To exit from the GUI, press MENU.
•Avoid displaying computer patterns which repeat every other line (horizontal stripes). (Flickering may occur, making the image hard to see.)
•When inputting DTV 480P signals, select “480P” in step 4 above.
Projector | Remote control |
1, 4
2, 3
(GUI) On-screen Display
Checking the Input Signal
This function allows you to check the current input signal information.
(Slide the MOUSE/ADJUSTMENT switch | MOUSE ADJ. |
on the remote control to the ADJ. position.) |
|
1Press MENU.
2Press ß/© to select “Fine Sync”.
3Press ∂/ƒ to select “Signal Info” to display the current input signal.
4To exit from the GUI, press MENU.