Digital Image Magnification
Projector | Remote control |
2
1
3
On-screen Display
This function allows you to magnify a specific portion of an image. This is useful when you want to display a detailed portion of the image.
(Slide the MOUSE/ADJUSTMENT switch MOUSE 
ADJ. on the remote control to the ADJ.) 
1Press ENLARGE. Each time ENLARGE is pressed, the image will be magnified.
2When the image is magnified, you can pan and scan around the image by using ∂/ƒ/ß/©.
•Each time ENLARGE is pressed, image magnification toggles as shown below.
1
4 
9 
16 
36 
64
•If the input signal is changed during digital image magnification, the image will return to 1. The input signal is changed
(a)when INPUT is pressed,
(b)when the input signal is interrupted, or
(c)when the input resolution and refresh rate changes.
sg
3To return to 1, press UNDO.
Useful Features