JVC GR-AX627 Remote Control Unit, Pull OUT Battery Holder, Replace Battery Holder, Functions

Infrared beam effective area

10° 5m(16.4ft)

30
°	30°
10°

Infrared beam sensor window

13

Remote Control Unit

The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (PLAY, STOP, PAUSE, FF, and REW) of your VCR. This remote control unit makes additional recording functions possible.

Before use, refer to the instruction booklet.

PULL OUT BATTERY HOLDER

1 Pull out the battery holder by inserting a pointed instrument into slot A .

The transmitted beam may not be effective or may cause incorrect operation when the infrared beam sensor window is directly exposed to sunlight or powerful lighting.

	1
2	7
	8
3	9
4	0
5	!
6	@

INSERT BATTERY

2 Insert the lithium battery *(CR2025), with its plus (+) side up, into the battery holder.

REPLACE BATTERY HOLDER

3 Insert the battery holder into the remote control unit, and push the holder until it clicks in place.

*Read warning on lithium battery (☞ pg. 2).

2

3

A 1

		Functions
Buttons
	With the camcorder’s power switch		With the camcorder’s power switch set
	set to “CAMERA”.		to “PLAY”.
1Infrared beam	Transmits the beam signal.
transmitting window
2ZOOM (T/W) buttons	Zoom (invariable speed, ☞ pg. 15)		—
3PLAY button	—		Playback start (☞ pg. 30)
4STOP button	—		Stop (☞ pg. 30)
5REW button	Retake (Rewind) (☞ pg. 15)		Rew/Rew Shuttle Search (☞ pg. 30)
6INSERT button	—		Insert Editing (☞ pg. 36)
7START/STOP button	Functions same as the Recording Start/Stop button of the camcorder.
8INT. TIME button	Self-Timer(☞pg. 26)/Time Lapse (☞ pg. 27)		—
9REC TIME button	Animation/Time lapse (☞ pg. 27)		—
0PAUSE button	—		Pause (☞ pg. 31)
!FF button	Retake (Forward) (☞ pg. 15)		FF/FF Shuttle Search (☞ pg. 30)
@A. DUB button	—		Audio dubbing (☞ pg. 37)