JVC GR-AX527, GR-AX627 manual Supply Power, Attach Battery Pack, Detach Battery Pack, Refresh

8

GETTINGSTARTED

Power

CHG. (charge) indicator

This camcorder’s 3-way power supply system lets you choose the most appropriate source of power.

NOTES:

●No function is available without power supply.

●Use only specified power supply.

●Do not use provided power supply units with other equipment.

CHARGING THE BATTERY PACK

SUPPLY POWER

POWER indicator

END indicator

Marks

To AC outlet

1 Connect the charger’s AC power cord to a wall outlet. The power indicator lights.

ATTACH BATTERY PACK

2 Align the marks and slide the battery pack in the direction of the arrow until it locks in place. The CHG. indicator lights.

DETACH BATTERY PACK

3 When charging is completed, the END indicator lights. Slide the battery pack opposite the direction of the arrow.

REFRESH switch REFRESH indicator

BATT. PACK	CHARGE	DISCHARGE
BN-V12U	approx. 1 hr. 10 min.	approx.
		3 hrs. 30 min.
BN-V22U	approx. 2 hrs. 10 min.	approx. 7 hrs.
BN-V25U	approx. 2 hrs. 40 min.	approx. 10 hrs.

Hook on.

Push in.

BATT. RELEASE

**REFRESH

The AC power adapter features a REFRESH function that allows you to fully discharge the battery pack before recharging.

To discharge the battery . . .

.... attach the battery pack to the adapter as

shown in the illustration to the left. Then push REFRESH. The REFRESH indicator lights when discharging starts, and goes out when discharging is complete.

USING THE BATTERY PACK

ATTACH BATTERY PACK

1 Hook its top end to the camcorder and push the battery pack in until it locks in place.

DETACH BATTERY PACK

2 Slide BATT. RELEASE and pull out the battery pack.

RECORDING TIME

BATT. PACK	GR-AX627/AX527	GR-AX827/AX727
BN-V12U	approx. 1 hr. 5 min.	approx. 1 hr.
	(35 min.)	(35 min.)
BN-V22U	approx. 2 hrs. 15 min.	approx. 2 hrs. 10 min.
	(1hr. 25 min.)	(1 hr. 20 min.)
BN-V25U	approx. 3 hrs.	approx. 2 hrs. 50 min.
	(1hr. 50 min.)	(1 hr. 50 min.)

( ): when the video light is on (GR-AX827/AX627 only).