Sharp XG-C40XU Setting the Password, Changing the Password, Clearing the Password

Password

Projector Remote control

1, 6

2, 3,

4, 5

(GUI) On-screen Display

A password can be set by the user and used with the keylock level to prevent adjustments to certain settings on the GUI.

Setting the Password

(Slide the MOUSE/ADJUSTMENT switch	MOUSE ADJ.
on the remote control to the ADJ. position.)

1Press MENU.

2Press ß/© to select “Options”.

3Press ∂/ƒ to select “Password”, and then press

©.

4Enter the new password using ∂/ƒ to select the desired number, and then press © to select the next digit. Continue this procedure for the remaining three digits, and then press ENTER.

5Enter the password again (“Reconfirm”) using ∂/ ƒ/ß/©, and then press ENTER.

6To exit from the GUI, press MENU.

	• After setting the password, be sure to write it down in a
	secure location so as not to forget it.
(GUI) On-screen Display	Changing the Password
	(Slide the MOUSE/ADJUSTMENT switch
		MOUSE	ADJ.
	on the remote control to the ADJ. position.)
	1 Follow steps 1 to 3 in “Setting the Password”
	above.
	2 Enter the old password using ∂/ƒ/ß/©, and then
	press ENTER.
	3 Enter the new password using ∂/ƒ/ß/©, and
	then press ENTER.
	4 Enter the password again (“Reconfirm”) using ∂/
	ƒ/ß/©, and then press ENTER.

Useful Features

Clearing the Password

If you forget your password, you can use the following procedure to clear the password.

(Slide the MOUSE/ADJUSTMENT switch on the remote control to the ADJ. position.)

MOUSE ADJ.

ON / ENTER / ON / ENTER / ON / ENTER /

MENU

•This procedure can be performed either from the projector or with the remote control.

E-42