Operation
Table 4-1. Aspect Ratio Settings (continued)
Aspect Ratio | Description | |
|
|
|
Virtualwide 2.35 |
| A 2.35 image is stretched anamorphically in |
| ||
|
| both directions to fill a 16:9 image. (The |
| 2.35:1 Image on | secondary anamorphic lens then |
| 16:9 Screen | “stretches” the image back to 2.35:1.) |
|
| |
|
|
|
|
|
|
Virtualwide 2.35 is available only on
2.35:1 Image on 16:9 Screen with VirtualWide 2.35
2.35:1 Image on
2.35:1 Screen with
VirtualWide 2.35
Use the controls in the Picture Menu to calibrate your
The
All signal types require separate processing. Therefore, you need to calibrate each input separately. Runco recommends calibrating the
1.Component SD
2.
3.Composite
4.HD/RGB 1 / HD/RGB 2
5.DVI 1 / DVI 2
When you change a picture quality setting, save the change to a
Note preset afterwards. Otherwise, the change will be lost when a different input is selected. (Picture quality settings are saved for
each input and resolution separately.) For information about saving settings, refer to ISF Presets on page 48.
Picture
Picture
Brightness
Contrast
Color
Tint
Sharpness
Runco | 43 |