Runco VX-4000d, VX-5000d manual Enter / Cursor Buttons, Focus / Focus +, Zoom / Zoom +

Controls and Functions

16.ENTER / Cursor Buttons (, , , )

Use these buttons to select items or settings, adjust settings or switch display patterns.

When no menus are present on-screen, the UP and DOWN buttons toggle through the available aspect ratios, in this order:

UP Button = Anamorphic - Standard (4:3) - Letterbox - VirtualWide - Cinema - Virtualwide 2.35

DOWN Button = Virtualwide 2.35 - Cinema - VirtualWide - Letterbox - Standard (4:3) - Anamorphic

Note	Virtualwide 2.35 is available only on CineWide-equipped projectors.
	For more information about aspect ratios, refer to Table 4-1.

Likewise, the LEFT and RIGHT buttons toggle through the different source inputs, in this order:

LEFT Button = HD Pass Thru 2 - HD Pass Thru 1 - DVI 2 - DVI 1 - HD/RGB 2 - HD/RGB 1 - Component SD - S-Video 2 - S-Video 1 - Composite

RIGHT Button = Composite - S-Video 1 - S-Video 2 - Component SD - HD/RGB 1 - HD/RGB 2 - DVI 1 - DVI 2 - HD Pass Thru 1 - HD Pass Thru 2

Press ENTER to select a highlighted menu item or confirm a changed setting.

17.FOCUS - / FOCUS +

Press and hold either of these buttons to focus the projected image.

18.ZOOM - / ZOOM +

Press and hold the ZOOM + button to enlarge the image. Press and hold the ZOOM - button to zoom out.

To use the motorized lens controls, first rotate the Runco logo plate

Note one quarter-turn (90 degrees) to uncover the lens control IR receiver; see Figure 2-1or Figure 2-2.

18 Runco VX-4000d/VX-5000d Owner’s Operating Manual